Please use our links: LEGO.com • Amazon
Recent discussions • Categories • Privacy Policy • Brickset.com
Brickset.com is a participant in the Amazon Services LLC Associates Program, the Amazon.com.ca, Inc. Associates Program and the Amazon EU Associates Programme, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.
As an Amazon Associate we earn from qualifying purchases.
Comments
Recently my mother in law bought me a bag of LEGO on an antique fair in the UK. And antique it was! There were quite some red and white bricks in there that were of noticeable poorer quality than the bricks that I'm used to: they are slightly less rigid, look less smooth and most importantly they don’t interlock properly… I remember having wondered before how LEGO managed to control tolerances in their (or ‘the’) early days of injection molding. Well, they didn’t, haha! Anyway, nice to see some first generation (?) parts that I didn’t even know existed!
There was some newer stuff in the bag too, however ‘newer’ is relative, I’m guessing it’s all 60’s and 70’s. Below is a picture of the printed bricks I found but haven't seen before. Scrabble anybody? ;-)
PS: The plate on the picture was probably standard back then, I just included it because it looks so odd to me! There were also plates in the bag that had the current 'circular' bottom pattern but still were of inferior quality (proven by the fact that all have broken edges!) than the ones LEGO produces nowadays.
The best way to describe them it like fishing rods but about 8inches long Approx. Can't post a pic right now. I thought tehy might be technic partys but can't find a modle they might go on.
Thanks in advance and will try a post a pic.
Tried Peeron last night as well, no luck.
Defo Lego. My wife will be home with her camera today so will post pic ASAP.
The doors confuse me - they are type 801a and 802a, and they exist in red, blue and yellow - I have a couple laying around somewhere - but I can only find one set (730) that uses any of them. But they are definitely from the late 1960s.
The plate is a standard "waffle-bottom" plate used in early sets.
The LEGO number is 2793, and it was used in a vast number of technic sets from 1989 until 2003.
The black box is a battery-box for the Light & Sound-system. If you have a light, or a soundbrick, like this
As for the red build, I have no idea, it could be anything, even just someone putting random bricks together.
Link here.
http://www.flickr.com/photos/[email protected]/6979148558/in/photostream
probably the best photo.
I have checked bricklink and peeron
I also have a technic test car 8865 - any idea where I can find instructions for this?
Thanks :)
The policecar looks like a partly (dis)assambled 6684 from 1984, and most of the other bricks also looks like something from around 1984.
To identify the slope-brick with the fire-symbol, I would go to peeron.com and search for "slope fire", and it brings up this result: http://www.peeron.com/inv/parts/3039p09 - I bet that it is from the 6611 Fire Chief's car
Enjoy searching peeron (or you can use bricklink for the same purpose) but beware that it is quite addictive :)
Just have to see if there are any other bits that fit with and i can see if i have a boat / ship as well.
http://www.brickset.com/detail/?Set=6416-1
is this it?
Tip of an xwing
Is there a way to search torso designs to see what the rest of the figure should look like and from which set they are from? I search through minifig but brings 5700 different figures. can i narrow it down further?
Anyway here's a picture:
The piece on the left looks like a tile with two studs on top and a 45 degrees arch. On the right, it's what I think are 4 different parts. The black ball thing is part 53585? What's the disk though? (The fourth part is behind the disk and it's one of those connectors).
I joined last night (I wanted somewhere to list all the models I have so far) and I have found one that does not seem to be listed anywhere and wondered if anyone can help.
He is a blue ninja model (I think that's Jay) and I got him free in a magazine (I think it was Toxxic, it also has a lenticular Ninjago sticker of eyes!) late last year...being the silly person I am I got rid of the packaging because at the time I was thinking of just collecting Minifigures and that was it.
Here is an image of the little fellow, this is what was in the set....does anyone know what version he is?