Shopping at LEGO or Amazon?
Please use our links: LEGO.comAmazon
As an Amazon Associate we earn from qualifying purchases.

Collecting certain parts only

11719212223

Comments

  • JudgeChuckJudgeChuck UKMember Posts: 1,472
    Nice! What colour are the ones at bottom-right? Are they pearl gold?

  • FodderFodder AustraliaMember Posts: 333
    edited October 2020
    Nice! What colour are the ones at bottom-right? Are they pearl gold?

    Yep. Pearl Gold. I like them, but they don’t quite fit the colour-wheel type display that I’m going for.
    JudgeChuck
  • The_RancorThe_Rancor Dorset, UKMember Posts: 1,957
    Nice! What colour are the ones at bottom-right? Are they pearl gold?

    Introduced in General Grievous’ Overpriced Starfighter I believe
    BumblepantsJudgeChuck560HeliportandheMr_CrossKungFuKenny
  • AstrobricksAstrobricks Minnesota, USMember Posts: 4,504
     General Grievous had a lot of disposable income.
    KungFuKenny
  • PaperballparkPaperballpark Near ManchesterMember Posts: 4,085
    Not enough for a UCS MF though...
    AstrobricksiwybsKungFuKennysnowhitie
  • stluxstlux LuxembourgMember Posts: 2,416
    Nice! What colour are the ones at bottom-right? Are they pearl gold?

    Introduced in General Grievous’ Overpriced Starfighter I believe
    Actually already introduced in 2018's #853780 Creative Rings, and also present in last year's #40338 Christmas Tree and #70676 Lloyd's Titan Mech.

    Getting used a lot since; in 16 sets by now.
    KungFuKennyandheiwybs
  • The_RancorThe_Rancor Dorset, UKMember Posts: 1,957
    ^ I didn’t notice it until it was used in a Star Wars set, which is pretty typical for me ;)
    KungFuKenny560Heliport
  • 560Heliport560Heliport Twin Cities, MN, USAMember Posts: 2,576
    ^ I didn’t notice it until it was used in a Star Wars set, which is pretty typical for me ;)
    Wait, you're a Star Wars fan? I'd never have guessed! 😀
    KungFuKenny
  • Casper_vd_KorfCasper_vd_Korf Twente, The NetherlandsMember Posts: 196
    edited December 2020
    After sausages and croissants I thought I’d bring some cheese (slopes) to the table!


    I think this is all of them, and I wish a new color would come out to even up the display... 🙂
    You could change the proportions, I think 5x11 would fit. (Maybe not with the trans parts though)
    KungFuKenny
  • madforLEGOmadforLEGO Chicagoland USMember Posts: 10,155
    edited December 2020

    I've spent a few hours updating my spreadsheet of available monochrome minifigs. It now says whether you can get each part plain or only printed, and if printed, there's a note saying which sets or themes that part is in.


    Awesome list, you are missing one color though: BL 'Yellowish Green' (not lime.. its mostly Dr Phosphorus) I believe. While it cannot be completed yet (missing the hips in that color) the rest is available( though printed)
  • PaperballparkPaperballpark Near ManchesterMember Posts: 4,085

    I've spent a few hours updating my spreadsheet of available monochrome minifigs. It now says whether you can get each part plain or only printed, and if printed, there's a note saying which sets or themes that part is in.


    Awesome list, you are missing one color though: BL 'Yellowish Green' (not lime.. its mostly Dr Phosphorus) I believe. While it cannot be completed yet (missing the hips in that color) the rest is available( though printed)
    No it's not missing - it's at the bottom of the 'Solid' colours, under Yellow :)
    WesterBricks
  • madforLEGOmadforLEGO Chicagoland USMember Posts: 10,155

    I've spent a few hours updating my spreadsheet of available monochrome minifigs. It now says whether you can get each part plain or only printed, and if printed, there's a note saying which sets or themes that part is in.


    Awesome list, you are missing one color though: BL 'Yellowish Green' (not lime.. its mostly Dr Phosphorus) I believe. While it cannot be completed yet (missing the hips in that color) the rest is available( though printed)
    No it's not missing - it's at the bottom of the 'Solid' colours, under Yellow :)

    My bad, did not recognize it by color.
  • AllBrickAllBrick UKMember Posts: 1,477
    One of my favourite threads here, and I’ve been so long I haven’t posted since the pages were in single digits. 

    I shall dig out some bits and add to the pile again. 
    KungFuKenny
  • TheOriginalSimonBTheOriginalSimonB Felixstowe Member Posts: 1,644
    ^Drool.
    KungFuKennyPaperballpark
  • Switchfoot55Switchfoot55 The Northwest, USAMember Posts: 2,317
    ^Well, thanks a lot...

    Off to BL to start a new Wanted list.
    pxchrisKungFuKenny
  • 560Heliport560Heliport Twin Cities, MN, USAMember Posts: 2,576
    CCC said:





    Where are the white range finders?

    You're looking at them! Rancor has all the white rangefinders in existence! :)
    AstrobricksKungFuKennySumoLego
  • TkattTkatt MNMember Posts: 472

    Where are the white range finders?

    You're looking at them! Rancor has all the white rangefinders in existence! :)
      The sprue that Voldemort's wand comes on can be modified with a little cutting to turn it into a range finder.  It doesn't hold on for play. It will attach to that tiny helmet hole though and works ok for display. It's not perfect, but it is official LEGO.
    560HeliportThe_RancorSwitchfoot55KungFuKennyAllBrick
  • JudgeChuckJudgeChuck UKMember Posts: 1,472
    @KungFuKenny Very nice! :-)

    But, ooh, you swine! I was just one away from finishing that collection myself and presenting it here! ;-)
    KungFuKenny560HeliportBumblepantsMr_CrosspxchrisAllBrick
  • KungFuKennyKungFuKenny Somewhere between Ice Station Odyssey and FabulandMember Posts: 2,057
    @KungFuKenny Very nice! :-)

    But, ooh, you swine! I was just one away from finishing that collection myself and presenting it here! ;-)
    Ha!  Sorry about that - don’t let me stop you from posting yours as well.  Maybe we should coordinate our efforts in the future! :-)
    JudgeChuck560HeliportMr_CrossAllBrick
  • JudgeChuckJudgeChuck UKMember Posts: 1,472
    @Fodder Sorry to be the bearer of bad tidings, but they've released another flower colour:

    Light Bluish Gray Plate, Round 1 x 1 with Flower Edge (5 Petals)

    At the moment, as far as I can tell, it is only available in one set: #4002020
    KungFuKennyFodderAllBrick
  • FodderFodder AustraliaMember Posts: 333
    @JudgeChuck thanks for the heads-up.
    It was only a matter of time before another colour was released. 
    Let the hunt begin.
  • JudgeChuckJudgeChuck UKMember Posts: 1,472
    Fodder said:
    @JudgeChuck thanks for the heads-up.
    It was only a matter of time before another colour was released. 
    Let the hunt begin.
    Yes, same here. I had only recently completed the available ones as well.
  • IstokgIstokg MichiganMember Posts: 2,278
    DeMontes said:
    Collection of LEGO hole punchers 😬


    Just got done adding the Muji promotional LEGO sets of 2009-2011 to my Unofficial LEGO Sets/Parts Collectors Guide, and boy are those Muji hole punchers expensive... $100+ each!!  :-O
    AstrobricksKungFuKennyDeMontesAllBrick
  • PaperballparkPaperballpark Near ManchesterMember Posts: 4,085
    edited January 24
    You should do a display of every element in White, Grey, and Blue, all lined up neatly in rows :)
    560HeliportMr_CrossandheGothamConstructionCostluxSwitchfoot55AllBrickSumoLego
  • DeMontesDeMontes North YorkshireMember Posts: 709
    You should do a display of every element in White, Grey, and Blue, all lined up neatly in rows :)
    I concur...please 
    Mr_CrossGothamConstructionCoSwitchfoot55AllBricksid3windr
  • SpidraxSpidrax In Space Since 1978Member Posts: 15
    That would take entirely too long!

    Here are some 1x1 plates. Three systems, three logos... and two prototypes :)



    pxchrisSwitchfoot55KungFuKennyWesterBricksCymbelineAllBrickkhmellymel
  • DeMontesDeMontes North YorkshireMember Posts: 709
    Snap!



    Spidrax said:
    That would take entirely too long!

    Here are some 1x1 plates. Three systems, three logos... and two prototypes :)

    KungFuKennySpidraxCymbelineMr_CrossAllBrickSumoLego
  • SpidraxSpidrax In Space Since 1978Member Posts: 15
    Haha cool :)
  • The_RancorThe_Rancor Dorset, UKMember Posts: 1,957
    And the crab guardian from Atlantis
    KungFuKenny560Heliportgmonkey76AllBrick
  • eMJeeNLeMJeeNL The NetherlandsMember Posts: 626
    Saw some trans-C3POs for sale on FB; bidding to start @€100 per colour. Anyone?

    GothamConstructionCoAllBrick
  • PaperballparkPaperballpark Near ManchesterMember Posts: 4,085
    You can get them from MinifigureDreams for about $55 each...
    Astrobricks
  • CCCCCC UKMember Posts: 19,776
    Are these out of hours overtime bonus moulds?
    andheAllBrick
  • PaperballparkPaperballpark Near ManchesterMember Posts: 4,085
    Yep.
  • CCCCCC UKMember Posts: 19,776
    They need to start marbling them.
    560HeliportAstrobricksIstokgAllBrickJackad7
Sign In or Register to comment.

Shopping at LEGO.com or Amazon?

Please use our links: LEGO.com Amazon

Recent discussions Categories Privacy Policy Brickset.com

Howdy, Stranger!

It looks like you're new here. Sign in or register to get started.

Brickset.com is a participant in the Amazon Services LLC Associates Program, the Amazon.com.ca, Inc. Associates Program and the Amazon EU Associates Programme, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.

As an Amazon Associate we earn from qualifying purchases.