Have You Seen My Unusual Parts? - a challenge.

Comments

• jason1976 LondonMember Posts: 281

  August 2020

  Finally found it thanks to the clues
  
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=clikits133#T=C
  
  I have no idea why I recognised it, I don't have any clikits sets, and definitely haven't been looking them up. Nope. No. No way *deletes browser history*
  
  Want to have a go at this? 
  
  
  

  

  2
• KungFuKenny Somewhere between Ice Station Odyssey and FabulandMember Posts: 2,361

  August 2020

  jason1976 said:

  Finally found it thanks to the clues
  
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=clikits133#T=C
  
  I have no idea why I recognised it, I don't have any clikits sets...
  
  

  Sure, we believe you... :-)
  

  jason1976 said:

  
  Want to have a go at this? 
  
  
  

  On my phone it just shows as a blank gray square— maybe it’s Wonder Woman’s airplane?  ;-)

  

  9
• andhe UKMember Posts: 3,708

  August 2020 edited August 2020

  https://www.bricklink.com/catalogItemIn.asp?P=bb0965&in=S
  
  Surprisingly few parts labelled as translucent. 
  
  Stumbled across this odd part/set the other day, thought it would fit well here.
  
  
  
  
  
  
  

  

  2
• 560Heliport Twin Cities, MN, USAMember Posts: 3,082

  August 2020

  https://www.bricklink.com/v2/catalog/catalogitem.page?P=633&name=Conveyor Belt Inclined Frame&category=[Conveyor]#T=C
  

  

  4
• 560Heliport Twin Cities, MN, USAMember Posts: 3,082

  August 2020

  I don't have another part to offer- it's bedtime, according to my cats.

  

  2
• andhe UKMember Posts: 3,708

  August 2020 edited August 2020

  Well, it's was peculiar to me. Almost chose some other parts of the assembly, but I guess if you know it, you know it 😉
  
  Edit: Not saying you did this, but also seen that Google lens finds it pretty easily (doh!). Perhaps because it's a standard render. Might also be worth pointing out to people to upload images, not just link them from bricklink with the url in the image... 😆 

  

  1
• 560Heliport Twin Cities, MN, USAMember Posts: 3,082

  August 2020

   I "cheated": I have #580 Brick Yard, so I recognized the part, but it still took some work to find it in yellow.

  

  2
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020

  Let’s kick this off again.
  
  Any takers?
  
  

  

  2
• vizzitor IrelandMember Posts: 426

  September 2020 edited September 2020

  It's a cat's rear end!

  
  

  
  

  What's this:
  

  
  

  

  5
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020 edited September 2020

  Good one. Scala towel bar. Found it by searching “bar” in tan parts.
  
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=6969#T=C
  
  I like the name of this one :)
  
  

  

  1
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020

  vizzitor said:

  It's a cat's rear end!

  
  

  
  

  What's this:
  

  
  

  Whoops, I guess it’s “Light yellow”. So I was really just searching “bar”.

  0
• Switchfoot55 The Northwest, USAMember Posts: 2,707

  September 2020

  Astrobricks said:

  Good one. Scala towel bar. Found it by searching “bar” in tan parts.
  
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=6969#T=C
  
  I like the name of this one :)
  
  

  This looks suspiciously like what I often find in bulk lots...
  
  I'm going to guess "random sticky liquid" 

  

  5
• vizzitor IrelandMember Posts: 426

  September 2020 edited September 2020

  Slime blur!

  
  

  What about this weirdly misleading image:

  
  

  

  1
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020

  Easily found by searching “elastic” :)
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=ScalaCribRib&name=Scala%20Cloth%20Elastic%20Ribbon%20for%20Baby%20Crib&category=%5BScala%5D#T=C&C=1
  

  

  3
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020

  How about a random torso:
  
  

  

  1
• Casper_vd_Korf Twente, The NetherlandsMember Posts: 229

  September 2020

  https://www.bricklink.com/v2/catalog/catalogitem.page?P=973pb0745&idColor=0#T=C&C=11
  Lucius Malfoys Torso!

  

  3
• Casper_vd_Korf Twente, The NetherlandsMember Posts: 229

  September 2020 edited September 2020

  
  
  

  

  3
• Cymbeline CanadaMember Posts: 500

  September 2020

  https://www.bricklink.com/v2/catalog/catalogitem.page?id=11718#T=S&O={"iconly":0} Homemaker Utensil Hand Mirror / Boat Paddle
  

  

  2
• Cymbeline CanadaMember Posts: 500

  September 2020

  
  

  

  2
• 560Heliport Twin Cities, MN, USAMember Posts: 3,082

  September 2020

  ^That's too easy, I have a bunch of those! ;)

  

  4
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020

  ^ You have a bunch of everything :)

  

  13
• 560Heliport Twin Cities, MN, USAMember Posts: 3,082

  September 2020

  Astrobricks said:

  ^ You have a bunch of everything :)

  I try!

  

  3
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020

  560Heliport said:

  ^That's too easy, I have a bunch of those! ;)

  Are you going to tell us, or are you trying to duck your “responsibility” to pick the next part? ;-)

  

  2
• KungFuKenny Somewhere between Ice Station Odyssey and FabulandMember Posts: 2,361

  September 2020 edited September 2020

  It’s the “Panel 4 x 4 x 6 Corner Convex Ribbed”
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=4737&idColor=11#T=C&C=11
  
  I knew it because I’m piecing together the Gamma V Laser Craft..
  
  

  I think it’s you turn @560Heliport , unless you want to pass... :-)

  

  9
• 560Heliport Twin Cities, MN, USAMember Posts: 3,082

  September 2020

  I'll pass. 

  0
• KungFuKenny Somewhere between Ice Station Odyssey and FabulandMember Posts: 2,361

  September 2020 edited September 2020

  Ok, how about this one ...
  
  

  Astrobricks said:

  Are you going to tell us, or are you trying to duck your “responsibility” to pick the next part? ;-)

  although I was tempted to use this one instead... :-)
  
  

  

  4
• Cymbeline CanadaMember Posts: 500

  September 2020

  https://www.bricklink.com/v2/catalog/catalogitem.page?id=64829#T=S&C=12&O={"color":12,"iconly":0}  Container, Box 8 x 3 x 3 HO Car Showcase
  

  

  4
• Cymbeline CanadaMember Posts: 500

  September 2020

  How about this one?

  

  3
• vizzitor IrelandMember Posts: 426

  September 2020

  That took a while! Seems to be an old garage door mechanism.
  

  I'm spending far too much time searching Bricklink. this game is too addictive.

  
  

  How about this chili pepper:

  
  

  

  4
• KungFuKenny Somewhere between Ice Station Odyssey and FabulandMember Posts: 2,361

  September 2020 edited September 2020

  That does look like a pepper, but actually is a dinosaur tail... :-) Now I have an idea for an MOC with red peppers!
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=40395c01#T=C
  
  How about this
  

  

  2
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020 edited September 2020

  Cymbeline said:

  How about this one?

  I think we’re starting to repeat ourselves. @Paperballpark posted a garage door counterweight about a month ago :)

  0
• Bumblepants DFW/BGMember Posts: 7,297

  September 2020 edited September 2020

  KungFuKenny said:

  That does look like a pepper, but actually is a dinosaur tail... :-) Now I have an idea for an MOC with red peppers!
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=40395c01#T=C
  
  How about this
  

  I don't know but I hate it.
  
  Edit, it's probably a Kingdoms constraction head but I'm not going to try and look up bricklink parts on my phone.

  

  3
• jason1976 LondonMember Posts: 281

  September 2020 edited September 2020

  Think @Bumblepants was right - https://www.bricklink.com/v2/catalog/catalogitem.page?P=bb0153pb06b#T=C&C=97 - I'm not a Kingdoms fan but assume King Mathias is in Kingdoms?
  
  Searching "kingdoms" didn't find it, and strangely neither did "blue head" but it did find this monstrosity:
  
  
  
  which pointed me down the route of "large head" which found it!

  

  3
• jason1976 LondonMember Posts: 281

  September 2020

  Want to try this one?
  
  
  

  

  2
• KungFuKenny Somewhere between Ice Station Odyssey and FabulandMember Posts: 2,361

  September 2020 edited September 2020

  That's a Duplo bush/rock.  
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=64132&name=Duplo Plant Bush / Tree Top / Rock Pile with 2 Studs&category=[Duplo, Plant]#T=S&O={"iconly":0}
  
  How about this ? (maybe be specific to the set it is in...)
  
  

  

  2
• Casper_vd_Korf Twente, The NetherlandsMember Posts: 229

  September 2020

  https://www.bricklink.com/v2/catalog/catalogitem.page?P=BA111pb01&name=Stickered Assembly 8 x 1 x 5 with Mirror with Black Borders Pattern (Sticker) - Set 265-1 - 4 Brick 1 x 6, 1 Brick 1 x 8&category=[Sticker Over Assembly]#T=C&C=1
  Under "mirror sticker"

  

  4
• Casper_vd_Korf Twente, The NetherlandsMember Posts: 229

  September 2020

  
  

  

  1
• datsunrobbie West Haven , CTMember Posts: 1,761

  September 2020

  That blue monstrosity is https://brickset.com/parts/4567986/spidermonkey
  
  The grey cloud is
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=64132&idColor=86#T=S&C=86&O={"color":86,"iconly":0}
  
  How about this one?
  
  

  

  2
• Paperballpark Near ManchesterMember Posts: 4,220

  September 2020

  That looks like a storage box lid, but it's too late here to properly look!

  

  1
• vizzitor IrelandMember Posts: 426

  September 2020 edited September 2020

  I have to stop spending so long doing these.

  Took a while using the Advanced Search for "base" and limiting the colour to dark green to find it's a football pitch.

  The grey circle one is confusing. It's not listed in any sets but it showed up under "base" too.

  During my searches, I came across a leak for the followup to the Super Mario range:

  

  
  

  But anyway, here's another part that doesn't look like its description:

  
  

  

  3
• andhe UKMember Posts: 3,708

  September 2020 edited September 2020

  We seem to be circling back round on Knight's Kingdom. Its a shield, but not as we know it
  

  https://www.bricklink.com/v2/catalog/catalogitem.page?P=51812&name=Nestle Promo Figure Rascus Shield&category=[Large Figure Part]#T=C

  
  

  

  
  

  Why doesn't anyone collect THESE polybags (now that I say it, I bet there is someone who does...)
  

  
  

  

  6
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020

  andhe said:

  We seem to be circling back round on Knight's Kingdom. Its a shield, but not as we know it
  

  https://www.bricklink.com/v2/catalog/catalogitem.page?P=51812&name=Nestle Promo Figure Rascus Shield&category=[Large Figure Part]#T=C

  
  

  

  
  

  Why doesn't anyone collect THESE polybags (now that I say it, I bet there is someone who does...)
  

  
  

  I wonder if this is in @Istokg ‘s masterwork.

  

  1
• andhe UKMember Posts: 3,708

  September 2020

  I'll pass. I had a look but perhaps someone has one they'd like to share. 

  0
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020

  I’ll give it another shot.
  
  

  

  1
• vizzitor IrelandMember Posts: 426

  September 2020

  Got it!

  
  

  Here's another long rectangle part:

  
  

  

  1
• Istokg MichiganMember Posts: 2,328

  September 2020

  Astrobricks said:

  andhe said:

  We seem to be circling back round on Knight's Kingdom. Its a shield, but not as we know it
  

  https://www.bricklink.com/v2/catalog/catalogitem.page?P=51812&name=Nestle Promo Figure Rascus Shield&category=[Large Figure Part]#T=C

  
  

  

  
  

  Why doesn't anyone collect THESE polybags (now that I say it, I bet there is someone who does...)
  

  
  

  I wonder if this is in @Istokg ‘s masterwork.

  No.... Duplo, Primo, Galidor, Bionicles, Clickits, later Scala, and these large Knights Kingdom II figures are not part of the LEGO System of Play... and are not included.

  

  3
• masterX244 GermanyMember Posts: 530

  September 2020

  vizzitor said:

  Got it!

  
  

  Here's another long rectangle part:

  
  

  
  thinking im close but my search-fu doesnt yield something in the right length...
  

  0
• jason1976 LondonMember Posts: 281

  September 2020 edited September 2020

  masterX244 said:

  vizzitor said:

  Got it!

  
  

  Here's another long rectangle part:

  
  

  
  thinking im close but my search-fu doesnt yield something in the right length...
  

  I'm bumping this as my search-fu hasn't found this yet too, and I think this is a fun (and educational) thread that needs to keep going!
  
  @vizzitor we may need a clue if no one has got it in a few more days :)

  

  2
• Mr_Cross East Anglia (UK)Member Posts: 1,621

  September 2020

  @jason1976 It's a scala piece. I don't recall which set, but it builds a sort of tent frame iirc.

  

  1
• Astrobricks Minnesota, USMember Posts: 5,172

  September 2020

  Found it. On page 16 after searching for “long”. Scala support tall. 25.5 studs long
  https://www.bricklink.com/v2/catalog/catalogitem.page?P=33267b&name=Scala%20Support%20Tall,%20Type%202%20(connector%20locating%20hole%20on%20grooved%20side)%20-%2025.5%20Studs%20Long&category=%5BScala%5D#T=C&C=1
  

  

  4