Shopping at LEGO or Amazon?
Please use our links: LEGO.comAmazon
As an Amazon Associate we earn from qualifying purchases.

[Master thread] Help identifying parts, sets and minifigs

1798082848591

Comments

  • 560Heliport560Heliport Twin Cities, MN, USAMember Posts: 1,511
    The four pieces in the second photo look like blasters for Hasbro's Star Wars action figures.
  • AstrobricksAstrobricks Minnesota, USMember Posts: 2,889
    is is Lego brand? I do not see Lego markings on it. but i assume if it is the stylus for a DS it is not Lego that makes it right?
    Yah, probably Nintendo makes it? Just a wild guess :)
    oldtodd33Baby_Yoda
  • LarsSchuyLarsSchuy Brighton UKMember Posts: 1
    Thank you The_rancor! Much appreciated. I will move the thread to the discussion you suggested. 
  • drdavewatforddrdavewatford Hertfordshire, UKAdministrator Posts: 6,434
    LarsSchuy said:
    I will move the thread to the discussion you suggested. 
    You won't be able to do it yourself so I've moved it.
    Astrobricks
  • PaperballparkPaperballpark UK / KLMember Posts: 3,620
    I was in the Lego store in Salt Lake City last week, and found the following torso in the 'Build a minifig' bins. I got three of them, as I've not seen it before (I only know of the two CMF baseball player torsos).



    Having now looked it up on Bricklink (the image above is from there), it shows the torso part as 'new' and doesn't list it as being in any sets.

    Does anyone have any idea where it's come from? Lego surely can't have printed a new torso just to stick into BAM bins?
    BrainsluggedSwitchfoot55Baby_YodaMr_CrossFowlerBricks
  • Switchfoot55Switchfoot55 The Northwest, USAMember Posts: 1,830
    ^I'm stumped. Great find though!
    Mr_Cross
  • ShibShib UKMember Posts: 5,304
    There have been quite a few minifigure parts show up just for BaM bars lately, think it started last year, I’ve got some hats and hair pieces that haven’t been in any sets yet.
    gmonkey76Mr_Cross
  • 560Heliport560Heliport Twin Cities, MN, USAMember Posts: 1,511
    I wonder if perhaps they're test-run pieces? Someone got smart and said, "Hey, instead of trashing these, we could sell them in BAM bars!"
  • gmonkey76gmonkey76 ChicagoMember Posts: 1,560
    @Paperballpark there have been quite a few BAM only parts in the USA, and there is photo evidence here https://forum.brickset.com/discussion/19310/us-bam-bar-contents#latest 
    andhe
  • andheandhe UKMember Posts: 2,959
    Yup new torsos, a new shield, recoloured parts. It's all happening over at the B-A-M bins.

    Up until now I think the new designs have mainly been colour switches of existing parts/designs so exciting to see exclusive designs appearing.
  • hazz78hazz78 UKMember Posts: 31
    Found 2 of 2x4 and 1 of 2x6 in what appears to be "Pearl Light Gray" in a job lot I recently bought.  Bricklink lists the parts in this colour, but doesn't list what set(s) they are found in.  All have a sort of marbled effect on the surface.  Any ideas?  Pictured next to a 2x4 in Light Gray (far right) for comparison.
    FowlerBricks
  • Switchfoot55Switchfoot55 The Northwest, USAMember Posts: 1,830
    Someone more in the know on this stuff may be able to confirm, but are these really light Grangemouth bricks? 
  • hazz78hazz78 UKMember Posts: 31
    Someone more in the know on this stuff may be able to confirm, but are these really light Grangemouth bricks? 
    I don't think so.  The underside of the 2x4 bricks suggests a more modern mould.
  • TheFewTheFew EnglandMember Posts: 1,522
    Lego or not?


  • andheandhe UKMember Posts: 2,959
    @hazz78 most of sellers that have 100 or more seem to be in the UK which would suggest a localised source. Perhaps a lego store or LUG project?
  • bandit778bandit778 Docking Bay 94. Member Posts: 2,105
    @TheFew,
    Yup, Lego.
    32494 in msg/lbg
    92906 in dsg/dbg
    AstrobricksMr_CrossBaby_Yoda
  • TheFewTheFew EnglandMember Posts: 1,522
    bandit778 said:
    @TheFew,
    Yup, Lego.
    32494 in msg/lbg
    92906 in dsg/dbg
    Thanks. Never seen those bits before. Looking at the sets they are in, I have at least 5 of them, but clearly I have never opened and built them :-)
    dmcc0davetheoxygenman
  • AstrobricksAstrobricks Minnesota, USMember Posts: 2,889
    bandit778 said:
    @TheFew,
    Yup, Lego.
    32494 in msg/lbg
    92906 in dsg/dbg
    They’re the two sides of a CV joint, right? So why did one of them (according to BL) come into existence 10 years before the other?
  • 560Heliport560Heliport Twin Cities, MN, USAMember Posts: 1,511
    Probably the "newer" one is a revised design.
    Astrobricks
  • AanchirAanchir United StatesMember Posts: 2,861

    K'nex I think.

    no idea and they can not fit into anything Lego

    they look like best lock brand to me.

    the monkey i think is playmobile as i think i have another one no ideas on the rest. 
    Again I am sorry for the crummy photos. computer camera is my only working camera right now so really junky photos. 
    Cheers!
    Your guesses are correct about the K'nex and Best-Lock parts as far as I can tell. The little clear circle bit looks like a bingo chip. Certainly nothing I recognize as LEGO in any of these pics.
    thehoarder
  • BobflipBobflip Member Posts: 520
    edited July 2019
    Found a loose battery cover, but can't find what it's meant to go with?




  • BobflipBobflip Member Posts: 520
    Ahhh, yes... battery *lid*, not cover. Good spot!
    andhe
  • TheMaker37TheMaker37 Norfolk,VaMember Posts: 482
    I have little experience with Technic sets but I got a #42006 in a lot I bought. I have an issue. The instructions show the (tan) connector sliding completely into the driving ring (red), then the gear (dk grey) slides onto the driving ring. The problem is the gear forces the connector out causing the gear to not turn when assembled. Am I missing some technique?

  • gelkstergelkster MN, USAMember Posts: 573
    Is it right around step 22 or 25? Try turning the dk bley gear around 
    andhe
  • TheMaker37TheMaker37 Norfolk,VaMember Posts: 482
    @gelksterI have tried all the configurations it needs to sit flush with the driving ring with the hollow side of the gear it all fits until the connector is slid in.
  • AstrobricksAstrobricks Minnesota, USMember Posts: 2,889
    edited August 2019
    I have little experience with Technic sets but I got a #42006 in a lot I bought. I have an issue. The instructions show the (tan) connector sliding completely into the driving ring (red), then the gear (dk grey) slides onto the driving ring. The problem is the gear forces the connector out causing the gear to not turn when assembled. Am I missing some technique?

    This really should be posted under: 
    https://forum.brickset.com/categories/building-and-techniques
    @Huw , @drdavewatford
  • gelkstergelkster MN, USAMember Posts: 573

  • gelkstergelkster MN, USAMember Posts: 573
    Thinking the funny grenades (laughing gas bombs?) & prison stripes imply a comic bad guy...
  • KungFuKennyKungFuKenny Deep in the Heart of TexasMember Posts: 1,013
    That’s Retox from Ultra Agents ...
    https://brickset.com/minifigs/uagt012/retox
    gelkster
  • KungFuKennyKungFuKenny Deep in the Heart of TexasMember Posts: 1,013
    From 70163 : Toxikita's Toxic Meltdown

    https://brickset.com/sets/70163-1/Toxikita-s-Toxic-Meltdown
    gelkster
  • gelkstergelkster MN, USAMember Posts: 573
    Thx KFK!!!
    KungFuKenny
  • cjjmd62cjjmd62 MinnesotaMember Posts: 0
    I got several sets or parts of sets from a family member, but I can't identify this one.  I think it must be Star Wars but I can't find it searching through everything.  The other sets are 2011-2013.  Thanks for the help!
  • 560Heliport560Heliport Twin Cities, MN, USAMember Posts: 1,511
    #7957 Sith Nightspeeder from 2011.
    drdavewatfordBaby_Yodagmonkey76Astrobricksmak0137FowlerBricks
  • Lego_Lord_MayorcaLego_Lord_Mayorca H-Town, USAMember Posts: 550
    ^Correct, but the new member should've posted this in the Set Identification Help thread: https://forum.brickset.com/discussion/513/master-thread-help-identifying-parts-sets-and-minifigs#latest

  • gelkstergelkster MN, USAMember Posts: 573
    Thats one of the easiest sets to ID based on the printing patterns alone ;)
    560Heliport
  • GeordiePaulGeordiePaul Glastonbury, CT, USAMember Posts: 599
    I’m assuming all of these pieces are from the same set, but I could be wrong. Can anyone guess what it could be based on the lime green colours and stickers?



    Many thanks in advance!

    By the way, I’m amazed at how nothing remains a mystery on this thread thanks to the wealth of knowledge from our fellow Bricksetters.
    gelkster
  • AstrobricksAstrobricks Minnesota, USMember Posts: 2,889
    ^ They may not all be from this set, but the stickered parts and mudguard arches look like they are from #9443
    KungFuKennyGeordiePaul
  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,505
    Looks like quite a few parts come from this set.  https://www.bricklink.com/catalogItemInv.asp?S=9457-1
    KungFuKennyGeordiePaul
  • KungFuKennyKungFuKenny Deep in the Heart of TexasMember Posts: 1,013
    edited August 2019
    The only set I can find that has both the inverse 2x2 roof tile AND the 2x2 round “boat stud” (piece 2664) in lime green is Cole’s Tread Assault #9444.  I agree that the other pieces are from the Rattlecopter and the Wrecking Ball.  Looks like whoever you got the pieces from was a fan of early Ninjago sets!
    AstrobricksGeordiePaul
  • gelkstergelkster MN, USAMember Posts: 573
    I'd have guessed World Racers (good guys have lime green & white vehicle parts) or Ninjago. The printing suggests a snake scale pattern. Often If I'm unfamiliar with a part origin, chances are it's from the NinjaGo series; I'm not well schooled in that line.

    GeordiePaul
  • gelkstergelkster MN, USAMember Posts: 573
    @GeordiePaul- personally when I pick up a mixed lot w/ unique parts that stand out,  I Iove researching them to see what sets theyre in, then determining whether I have the subsequent parts (& desire) to build the set(s).
    KungFuKennyAstrobricksGeordiePaul
  • GeordiePaulGeordiePaul Glastonbury, CT, USAMember Posts: 599
    I knew you guys would pull through with an obscure set that I’d never have found by myself. My wife picked up a couple of cases of Lego at Once Upon A Child here in Connecticut and the only pieces that seem to be from the same set are these lime green ones. There’s a bunch more of them but the ones in the photo seemed to be the easiest to identify a set from.

    Time to download the instructions and see if it’s all there amongst the random pieces :-)

    Much appreciated guys!
    KungFuKennyLittleLori
Sign In or Register to comment.

Shopping at LEGO.com or Amazon?

Please use our links: LEGO.com Amazon

Recent discussions Categories Privacy Policy

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Brickset.com is a participant in the Amazon Services LLC Associates Program, the Amazon.com.ca, Inc. Associates Program and the Amazon EU Associates Programme, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.

As an Amazon Associate we earn from qualifying purchases.