Home› Everything else LEGO
Shopping at LEGO or Amazon?
Please use our links: LEGO.com • Amazon
As an Amazon Associate we earn from qualifying purchases.

[Master thread] Help identifying parts, sets and minifigs

1…7879818384…110

Comments

  • gelkstergelkster Member Posts: 927
    Spoiler (NW) looks vaguely Lego
  • oldtodd33oldtodd33 Member Posts: 2,729
    edited June 2019
    The spoiler is this. https://www.bricklink.com/catalogItemIn.asp?P=61073&in=S

    The two center pieces are this. https://www.bricklink.com/catalogItemIn.asp?P=32307&in=S
  • oldtodd33oldtodd33 Member Posts: 2,729
    edited June 2019
    The piece in the sw corner is. https://www.bricklink.com/v2/catalog/catalogitem.page?P=61185c01#T=C&C=85

    The piece in the ne corner is. https://www.bricklink.com/catalogItemIn.asp?P=32310&in=S
  • gelkstergelkster Member Posts: 927
    @oldtodd33 Fantastic thx!!!
  • Mr_CrossMr_Cross Member Posts: 1,713
    edited June 2019
    Totally esoteric this one. Not strictly a part either. I think this is an insert to a Space LEGO set. I obviously don't own the set it's from, it was in the box of an incomplete #6195 I traded for on facebook.
    The cut-out section along one edge makes me think it might have been a set with light and sound but I can't recall a box with these dimensions, there were Spyrius and Space Police parts in the box. If it was something like #6986 I'd assume there would be 'grid lines' on it.



    Thanks for any assistance.
  • TheWebExpert1TheWebExpert1 Member Posts: 35
    You guys are the best.  I tried zooming in with my camera, but it's a no-go.  It's just not sharp enough of a resolution to pick up the number.  I knew that 30 & 42 went together; I'm just looking for part numbers.  Thanks again!
  • ersiersi Member Posts: 229
    I have just found theese pieces in old toy bin can you help me identify them please? Especially minifigs
  • BrainsluggedBrainslugged Member Posts: 2,278
    @ersi - #6731 has got the hatless minifigure, the 3x6 dark grey slope and the black bar thing on a 1x2 plate that the blue guy's legs are pointing at.
  • ersiersi Member Posts: 229
    @Brainslugged
    thank you :)
  • BrainsluggedBrainslugged Member Posts: 2,278
    It also looks like a good chunk of the other pieces are from #7711 including those four dark tan wedge pieces, the brown robot guy and a lot of those black pieces. 
  • BrainsluggedBrainslugged Member Posts: 2,278
    The blue guy and the parts with the yellow printed slope is from #6437. Also just noticed that the two guys have got each other's legs on.
  • BrainsluggedBrainslugged Member Posts: 2,278
    And finally, #4792 has the sand green roof, the dark grey arches, the 1x1 round bricks and a bunch of the 1x2 grey and tan slope bricks.
  • ersiersi Member Posts: 229
    @Brainslugged
    thank you wow I really dont remember playing with exoforce set, also green roof is from some harry potter set I think
  • BrainsluggedBrainslugged Member Posts: 2,278
    @ersi - sorry, typo. That last one was meant to be #4702 (Harry Potter)!
    ersi
  • MudkipDoomMudkipDoom Member Posts: 37
    I just found this part on bricklink:
    https://store.bricklink.com/Serpente?itemID=170292121#/shop?o={"invID":"170292121"}

    And was wondering if anyone could help me identify it
  • BumblepantsBumblepants Member Posts: 7,730
    MudkipDoom said:
    I just found this part on bricklink:
    https://store.bricklink.com/Serpente?itemID=170292121#/shop?o={"invID":"170292121"}

    And was wondering if anyone could help me identify it
    Be careful, it will turn white if you leave it on that 2*6 to better blend into it's surroundings.
    Switchfoot55MudkipDoommak0137AanchirBaby_Yodagelkster
  • Switchfoot55Switchfoot55 Member Posts: 3,491
    ^^The original BL link you posted states that it's a custom piece. It also says the piece will soon be listed on BL. So, it's likely a new mold from a new summer Friends/Elves set. 

    Not sure there is much more to share?
  • MudkipDoomMudkipDoom Member Posts: 37
    Switchfoot55 said:
    ^^The original BL link you posted states that it's a custom piece. It also says the piece will soon be listed on BL. So, it's likely a new mold from a new summer Friends/Elves set. 

    Not sure there is much more to share?
    I've looked at all the recent friends sets (no elves sets in 2019) and couldn't find it, I was just wondering if anyone else had any insight. Also that is the only seller on bricklink selling that part, which I find particularly odd.
  • stluxstlux Member Posts: 2,450
    I found another image of the same chameleon on another Czech site:



    So I assume some "escaped" from the factory in Kladno, and as highlighted in the BL listing and reemphasized by @Switchfoot55, we'll see it soon in an as-yet-unannounced set.
  • MudkipDoomMudkipDoom Member Posts: 37
    @stlux
    Okay than, that would make sense. I'll have to keep my eyes open for that than
  • AanchirAanchir Member Posts: 3,044
    Switchfoot55 said:
    ^^The original BL link you posted states that it's a custom piece. It also says the piece will soon be listed on BL. So, it's likely a new mold from a new summer Friends/Elves set. 

    Not sure there is much more to share?
    Don't think it's from Friends/Elves — both those themes already have their own lizard mold (also used in Disney Princess before Rapunzel's chameleon Pascal got his own more accurate mold):


    The Friends/Elves/Disney version also isn't much larger than this one overall, so it's unlikely to represent a baby/newborn chameleon, which would be the only reason they'd be likely to release a new version of an animal they already have with this simpler, more traditional eye style.
    Switchfoot55gmonkey76
  • BrainsluggedBrainslugged Member Posts: 2,278
    I think you're safe to toss it all!
    thehoarderBaby_Yodagmonkey76ChromideMr_CrossAstrobricksKoolbrix2018
  • benbacardibenbacardi Member Posts: 712
    ^ Apart from the MacBook, I'd probably hang on to that ;-)
    thehoarderBaby_YodaMr_CrossAstrobricksKoolbrix2018
  • andheandhe Member Posts: 4,002
    https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/401812142086 

    Feel like I've seen something similar on this forum before. Apparently it's glued so I'm thinking shop display?
  • bev_greggiebev_greggie Member Posts: 1


    Any ideas? It's two pieces, the round bit has a pin hole and it creates a hinge... I've looked everywhere and can't find them but I don't want to throw them just in case! Thanks all.
  • oldtodd33oldtodd33 Member Posts: 2,729
    Those parts aren't Lego to the best of my knowledge. 
  • anisboyanisboy Member Posts: 13
    andhe said 
    33 has popped up before on this thread, I remember finding it the first time! It's a satellite or something.
    33 is from ISS model #7467
  • LarsSchuyLarsSchuy Member Posts: 1
    Hello, 

    I have inherited some Lego sets and would like to sell them. However, first comes identification. Could anybody help with the following pictures, please. Any clues are appreciated.

    Lars  
  • The_RancorThe_Rancor Member Posts: 2,626
    edited July 2019
    Welcome to the forum!

    Looks like you've got Friends, Elves and plenty of Technic there. I don't think the yellow 'power loader' type model is an official one but happy to be proven wrong. You've got ship from #41073, bus from #41134, van from #41310, #8272, #8371 (missing headlight). The last 2-3 I'm finding harder to identify because Technic has done so many diggers but I'd guess they're from the noughties.

    When posted in this thread linked below many users will often pounce in to identify the sets first! Try here with any future identifications and mods might generously move this thread to here too https://forum.brickset.com/discussion/513/master-thread-help-identifying-parts-sets-and-minifigs
    dmcc0Baby_Yodamak0137
  • dmcc0dmcc0 Member Posts: 778
    They look like old-style Dymo Labels where they are "stamped" on to the label rather than the modern printed Dymo labels.  Description you've given matches those old Dymo labels too.
    datsunrobbiethehoarderAstrobricksgmonkey76Mr_Cross
  • dmcc0dmcc0 Member Posts: 778
    www.dymo.com

    A brand that makes label printing machines etc.  Before printing labels was cheap, they did handheld rotary machines that stamped/embossed the letters into a rigid tape. A quick web search for "vintage dymo" would probably give you a better idea than my terrible description:)
    thehoarderMr_Cross
  • datsunrobbiedatsunrobbie Member Posts: 1,832
    http://www.dymo.com/en-US/label-makers-and-label-printers/home-office-label-makers-and-label-printers/organizer-xpress%C2%AE-pro-embossing-organizer-xpress--1

    Dymo does still make an embossing label maker. They were very popular in the US in the 1970s.
    thehoarderdmcc0
  • dmcc0dmcc0 Member Posts: 778
    White "pen" looking thing is a stylus for a Nintendo DS
    Baby_YodaKoolbrix2018
  • 560Heliport560Heliport Member Posts: 4,279
    The four pieces in the second photo look like blasters for Hasbro's Star Wars action figures.
  • AstrobricksAstrobricks Member Posts: 5,567
    thehoarder said:
    is is Lego brand? I do not see Lego markings on it. but i assume if it is the stylus for a DS it is not Lego that makes it right?
    Yah, probably Nintendo makes it? Just a wild guess :)
    oldtodd33Baby_Yoda
  • LarsSchuyLarsSchuy Member Posts: 1
    Thank you The_rancor! Much appreciated. I will move the thread to the discussion you suggested. 
  • drdavewatforddrdavewatford Administrator Posts: 6,756
    LarsSchuy said:
    I will move the thread to the discussion you suggested. 
    You won't be able to do it yourself so I've moved it.
    Astrobricks
Sign In or Register to comment.

Shopping at LEGO.com or Amazon?

Please use our links: LEGO.com • Amazon

Recent discussions • Categories • Privacy Policy • Brickset.com

Howdy, Stranger!

It looks like you're new here. Sign in or register to get started.

Sign In Register

Categories

Brickset.com is a participant in the Amazon Services LLC Associates Program, the Amazon.com.ca, Inc. Associates Program and the Amazon EU Associates Programme, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.

As an Amazon Associate we earn from qualifying purchases.