Please refrain from posting animated GIFs, memes, joke videos and so on in discussions other than those in the off topic area.

Dismiss this message to confirm your acceptance of this additional forum term of use.

New parts discussion

1910111315

Comments

  • LegoPegasister2015LegoPegasister2015 Westchester, NYMember Posts: 132
    edited November 2018
    The new Speed Champions Mini has something new for the wheel arches I believe. It looks similar to a black sausage but curved too much to be that. Also the car is 5-wide!
    Between that and the Unikitty part, could we be entering the era of the 5 stud brick?

    rd1899 said:
    ^You mean 1 x 5 x 2? ;)
    From the official images for # 
    Too bad this isn’t two parts that are only printed on one side. I could see some folks drooling over this part if it was plain.
    Just use the Rod of Q-Tip and the Polish Remöver of Na-íl to get the print off and it’s perfect!
    gmonkey76MrJacksonThe_RancorBaby_YodaAllBrickSumoLegoM_Boss
  • LyichirLyichir United StatesMember Posts: 703
    The new Speed Champions Mini has something new for the wheel arches I believe. It looks similar to a black sausage but curved too much to be that. Also the car is 5-wide!
    Between that and the Unikitty part, could we be entering the era of the 5 stud brick?

    rd1899 said:
    ^You mean 1 x 5 x 2? ;)
    From the official images for #70827:
    Too bad this isn’t two parts that are only printed on one side. I could see some folks drooling over this part if it was plain.
    I think it is two parts each only printed on one side? The set seems to come with three distinct face bricks.

    As for if we'll ever get a completely unprinted one... hard to say. Sizewise, there's little this part offers that an assembly of smaller bricks doesn't, besides the large printable area. But I suppose I could see this appearing unprinted in a theme like Juniors, or in a set where it is meant to be stickered.
  • ModeltrainmanModeltrainman In the Disney Infinity Toybox, Windows, or digging through LEGO parts.Member Posts: 196
    Pardon me, if this is a weird question, but where does everybody get the official pictures that you're zooming in on?

    rd1899
  • ShibShib UKMember Posts: 5,111
    The ones I posted were off the main site here (brickset.com)
    rd1899Modeltrainman
  • AstrobricksAstrobricks Minnesota, USMember Posts: 2,312
    Lyichir said:
    The new Speed Champions Mini has something new for the wheel arches I believe. It looks similar to a black sausage but curved too much to be that. Also the car is 5-wide!
    Between that and the Unikitty part, could we be entering the era of the 5 stud brick?

    rd1899 said:
    ^You mean 1 x 5 x 2? ;)
    From the official images for #70827:
    Too bad this isn’t two parts that are only printed on one side. I could see some folks drooling over this part if it was plain.
    I think it is two parts each only printed on one side? The set seems to come with three distinct face bricks.

    As for if we'll ever get a completely unprinted one... hard to say. Sizewise, there's little this part offers that an assembly of smaller bricks doesn't, besides the large printable area. But I suppose I could see this appearing unprinted in a theme like Juniors, or in a set where it is meant to be stickered.
    Oh, I see. I just looked at the Brickset entry for #70827 and it does seem to have three face bricks printed on one side. When I saw the cropped image I assumed it was two sides of one brick.

    At least we know they have the mold and could make it in any color they want.
  • BumblepantsBumblepants Sofia BG/Dallas TXMember Posts: 5,652
    Looking closer at #70834 Metalbeard Trike it looks like the gold bar piece is now in gunmetal? A great color for that engine detailing and could be great for mocs.
    Aanchir
  • VorpalRyuVorpalRyu AustraliaMember Posts: 2,231
    Pearl Dark Grey (aka Titanium Metallic)?!? Nice catch, I'll need at least 40 of them for my MOC parts supplies, here's hoping they'll end up available on B&P sometime in the near future.
    Aanchirxiahna
  • ShibShib UKMember Posts: 5,111
    They look like black to me, but I could be wrong...I frequently am. 
  • ShibShib UKMember Posts: 5,111
    New bird in upcoming Disney sets.. 



    Always like getting new animal pieces! 
    LostInTranslationBumblepantsAanchirSwitchfoot55madforLEGO
  • CCCCCC UKMember Posts: 17,515
    A blurred bird!

    FowlerBricks
  • BumblepantsBumblepants Sofia BG/Dallas TXMember Posts: 5,652
    Lyichir said:

    Forget the bird—how about that 3x3x2 Elves-style curved fence? As an Elves fan I'm super excited about that part!
    If only we were getting new Elves sets along with it. So far I am not seeing anything coming in 2019 my girls are going to have much interest in.
    Brainslugged
  • CCCCCC UKMember Posts: 17,515
    Lyichir said:
    Shib said:
    New bird in upcoming Disney sets.. 



    Always like getting new animal pieces! 
    Forget the bird—how about that 3x3x2 Elves-style curved fence? As an Elves fan I'm super excited about that part!
    So long as it comes in black at some stage I'll be happy too!
    wardm
  • wardmwardm BelgiumMember Posts: 537
    If I remember correctly, I’ve seen a leaked picture of a light bluish grey version of that same bird.
  • FauchFauch FranceMember Posts: 2,254
    is the front canopy for the pop up party bus new?
  • gmonkey76gmonkey76 ChicagoMember Posts: 1,418
    ^I think it's a recolor from the USC Slave 1
    LyichirAanchir
  • wardmwardm BelgiumMember Posts: 537

    New hair piece?? 
  • LostInTranslationLostInTranslation UKMember Posts: 5,500
    edited November 2018
    Don't think so @wardm
    Looks like Vicky's hair from #41338 to me. But it could be new! 

    Incidentally I love that we are getting some minidolls with attitude these days. Vicky (above) and Dottie from #41349 are just awesome. 
    stluxAanchir
  • wardmwardm BelgiumMember Posts: 537
    Oh never noticed that one before! 
  • BrainsluggedBrainslugged England (the grim North)Member Posts: 751
    Someone a while back mentioned there possibly being a new part forming the base arches of the Eiffel Tower, but is it just a printed #62360?
  • BumblepantsBumblepants Sofia BG/Dallas TXMember Posts: 5,652
    ^Yeah I believe its just a printed windscreen.

    On another note, one of my kids noticed one of the LM2 plant characters has a lavender crab recolor in its makeup which is kinda cool. 
    wardm
  • AanchirAanchir United StatesMember Posts: 2,791
    edited December 2018

    New part appearing in some of the sets like #41366 that include the new gear plates. It's the same style snap as https://brickset.com/parts/design-61485 but in a 2x2 size, so that it's compatible with the 4x4 gear plates.

    omniumAstrobricksFowlerBricksLyichirwardmDeMontesMr_Cross
  • BumblepantsBumblepants Sofia BG/Dallas TXMember Posts: 5,652
    So the Apocalypseburg has a bunch of interesting recolors. More sand green than I can keep track of but the sausages and angled walls in SG are standouts for sure. I am excited for the container wall panel in sand blue as that is a great color for that part. The pitchfork is new in lbgrey I think? That could be quite useful in mocs. What else can you guys see?
    wardm
  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,403
    Am I correct from my observations that the space helmets in the #70184 Benny's Space Squad other than Benny's helmet are new molds? Even if the chin straps aren't any thicker than the original Classic Space helmets, the recessed round area at the top of the helmet would make them new molds. 
    BrickByBrickCurvedRoadPlate
  • madforLEGOmadforLEGO Chicagoland USMember Posts: 9,256
    oldtodd33 said:
    Am I correct from my observations that the space helmets in the #70184 Benny's Space Squad other than Benny's helmet are new molds? Even if the chin straps aren't any thicker than the original Classic Space helmets, the recessed round area at the top of the helmet would make them new molds. 
    Looks like it, not surprising as I'm sure the old molds were long gone.
    rd1899
  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,403
    I would have expected Lego to improve the helmet design a bit by making the chin straps thicker if possible. 
  • PaperballparkPaperballpark UKMember Posts: 3,388
    Their material control will have improved many times over since the early 80s, so they probably felt they could make it strong enough without needing to make it thicker.
    stlux
  • omniumomnium Brickenham, UKMember Posts: 741
    I'd have thought they'd reuse the mold from the reissue figs, eg. #5002812-1 from 2014.
    Mynatt
  • ClassicsmileyClassicsmiley USAMember Posts: 19
    I'm really glad that they didn't use the helmet that was designed for the visor.  I really dislike the look of those re-issued figures.  Now that they have the mold, I really hope that they give us red, black, and blue versions of it as well.  (It would be nice to have a "new" version of Benny!)
    oldtodd33rd1899gmonkey76
  • rd1899rd1899 U.S.A.Member Posts: 141
    edited December 2018
    oldtodd33 said:
    Am I correct from my observations that the space helmets in the #70184 Benny's Space Squad other than Benny's helmet are new molds? Even if the chin straps aren't any thicker than the original Classic Space helmets, the recessed round area at the top of the helmet would make them new molds.
    Besides the recessed area on top, which matches Benny's "broken" helmet, the rear sides of the face openings look to have a continuous curve, rather than straight edges with rounded corners, also matching Benny's helmet. 
    Also, on the new helmets, the bottom of the face openings appear to be lower, creating a small gap, so that depending on the view, one can see the underside curves of the head.



    oldtodd33 said:
    I would have expected Lego to improve the helmet design a bit by making the chin straps thicker if possible. 
    To me, it looks like the new helmets overall are clearly thicker (especially when compared against a classic thin chinstrap helmet, part# 193a2), plus I think that the new helmets' chinstraps do seem to bulge out slightly, beyond than the new helmet's normal thickness.
    Here's a zoomed screenshot from just2good's review of #70841, comparing a new minifig with its vintage counterpart (which has a "thick" chinstrap helmet that is lacking side dimples - part# 193b1). 
    oldtodd33mak0137omniumstlux
  • scottdd2scottdd2 ADELAIDEMember Posts: 51

    While we're on helmets, I'd like a European style to modernize the fire service and since I'm wishing for things, an old fashioned one to add to the growing list of old style appliances Lego have put out.


    I did find this custom one but the purist in me won't allow it.

    https://www.shapeways.com/product/AUUGNADQA/european-fire-helmet

    FowlerBrickscody6268
  • CCCCCC UKMember Posts: 17,515
    Quite a few of the new vibrant coral parts are now available on bricks and pieces (re-opened today).
    Bumblepants
  • BumblepantsBumblepants Sofia BG/Dallas TXMember Posts: 5,652
    You can also order a teal brick separator. I am resisting the temptation though as I will no doubt end up with a ton in the next few years.
    LittleLori
  • CCCCCC UKMember Posts: 17,515
    Yes, that is one part I want but decided not to order.
  • pxchrispxchris Oregon, USAMember Posts: 461
    Haha... I made the jump and got one... thought I too am sure I'll end up with them in a number of other sets.
  • maniacmaniac Yorkshire, UKMember Posts: 784
    Bricks and Pieces order already shipped out yesterday for me. (It opened on 22nd)

    Got a second in yesterday too after missing a few parts. Still a few that have gone OOS which I know they had stock of before. 
  • CCCCCC UKMember Posts: 17,515
    maniac said:
    Bricks and Pieces order already shipped out yesterday for me. (It opened on 22nd)


    I must have missed it by a little while. I checked at about 9am on 22nd, then on 24th and reported back here once I knew it was open again.
  • maniacmaniac Yorkshire, UKMember Posts: 784
    CCC said:
    maniac said:
    Bricks and Pieces order already shipped out yesterday for me. (It opened on 22nd)


    I must have missed it by a little while. I checked at about 9am on 22nd, then on 24th and reported back here once I knew it was open again.
    I was going to report here but got side tracked by something. 
  • BumblepantsBumblepants Sofia BG/Dallas TXMember Posts: 5,652
    The husky dog is getting a dark orange/brown recolor in the new Jurassic sets. Probably some other notables I missed but that one jumped out at me.
    Aanchirgmonkey76BrickByBrick
  • TheOriginalSimonBTheOriginalSimonB Felixstowe Member Posts: 1,260
    Is the VHS printed tile new?
  • pxchrispxchris Oregon, USAMember Posts: 461
    Pretty sure that it is @TheOriginalSimonB! Fun piece too.
  • omniumomnium Brickenham, UKMember Posts: 741
    For new parts enthusiasts, Tim has recently posted this update on his site with some new parts worth watching out for:

    http://www.newelementary.com/2019/02/bricks-pieces-jonas-highlights-january.html

    The link to Jonas' list is something I wish I'd seen earlier today when I places a BnP order!!
    Mr_Crossgmonkey76wardmAstrobricksmadforLEGO
  • DadsAFOLDadsAFOL USAMember Posts: 613

  • PaperballparkPaperballpark UKMember Posts: 3,388
    Yeah what is that thing?
  • ShibShib UKMember Posts: 5,111

  • ShibShib UKMember Posts: 5,111
    The husky dog is getting a dark orange/brown recolor in the new Jurassic sets. Probably some other notables I missed but that one jumped out at me.
    I noticed that, what looks like flesh coloured eggs and more baby Dinos! 
    gmonkey76
  • DadsAFOLDadsAFOL USAMember Posts: 613

    Here's another WTH piece.
    Switchfoot55paulmison
  • DadsAFOLDadsAFOL USAMember Posts: 613
    here's a couple more interesting pieces.  Apparently a train track transition to flat so you can drive your train off track?  Also looks like a couple of new water elements.


    Bumblepantsmak0137MynattSwitchfoot55
Sign In or Register to comment.
Recent discussions Categories Privacy Policy