Shopping at LEGO or Amazon?
Please use our links: LEGO.comAmazon
As an Amazon Associate we earn from qualifying purchases.

[Master thread] Help identifying parts, sets and minifigs

14546485051108

Comments

  • TigerMothTigerMoth Member Posts: 2,343
    Lee said:

    I would have to agree with you TigerMoth. They look very much the same but just not quite right but saying that I may just put it away just incase. Thanks all
    I can't prove it, but I also think that whole wheel-cutter-wheel thing in the lawnmower is one piece. It seems to be held onto the bottom by clips.

    As I said, that seam suggests that it's not a LEGO part. TLG don't do things like that - it's one of the reasons it's expensive.

    You didn't give us any idea of scale. Have you tried putting anything in the hole? Like a Technic pin - when it's worth remembering that they'll always "click" home, otherwise they pin's left stressed and that makes it illegal.

    However, as you say, if you keep it, you can throw it away later; it doesn't work the other way around!
  • wjoeyjoneswjoeyjones USMember Posts: 19
    Istokg said:
     @wjoeyjones   
    Sorry to take so long... had internet connection issues.....

    Here is a 322 Samsonite Educational Gear Set, and although I don't have a better image, you can just make out the string in the lower right of the image.



    So yes, that is original to this set.   Now whether or not that was the same one used in the European Pull Toy, I doubt it.  Most non-specialized LEGO parts were produced at their Samsonite Loveland Colorado plant.  I don't think this intertwined string would qualify as a specialty LEGO part.  



    Thanks for the reply and the photo.  I don't believe the part is the same one used in the pull toy either, I just noticed the string looked similar.  I am glad to see that this was a LEGO / Samsonite part, I almost discounted it as a homemade piece.

    You do not happen to have a part count for this set?

    Thanks Again
    Joey
  • LeeLee ukMember Posts: 138
    TigerMoth said:
    Lee said:

    I would have to agree with you TigerMoth. They look very much the same but just not quite right but saying that I may just put it away just incase. Thanks all
    I can't prove it, but I also think that whole wheel-cutter-wheel thing in the lawnmower is one piece. It seems to be held onto the bottom by clips.

    As I said, that seam suggests that it's not a LEGO part. TLG don't do things like that - it's one of the reasons it's expensive.

    You didn't give us any idea of scale. Have you tried putting anything in the hole? Like a Technic pin - when it's worth remembering that they'll always "click" home, otherwise they pin's left stressed and that makes it illegal.

    However, as you say, if you keep it, you can throw it away later; it doesn't work the other way around!

    Na, doesn't fit lego at all and to be honest....its in the bin now! Thanks again.
  • Trev5374Trev5374 Member Posts: 3
    Hello everyone. Can anyone tell me what sets these are part of?

    Thanks so much...


  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,653
    edited January 2016
    The helicopter top is from Alien Conquest. I don't think the first picture is Lego but does look to be part of a General Grievous. The black cockpit only came in 2 sets here.  http://bricksetforum.com/discussion/71/how-do-you-display-minifigs/p1
  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,653
  • catwranglercatwrangler Northern IrelandMember Posts: 1,894
    edited January 2016
    @Trev5374 The second piece is the "basket" part of 6037, the Witch's Windship, from the Fright Knights Castle series: http://brickset.com/sets/6037-1/Witch-s-Windship
  • JramJram GlesgaMember Posts: 1
    Hi, first post. Putting together all my sets prior to selling, and have some pieces that I can't find/identify on Peeron.

    Does anyone know if these Shell bricks are from the same set, or different ones?
    If you look at the undersides, you'll see that one has two supports (on pillars 2 and 4, flush with the bottom edge) and one has a central support (which stops short of the bottom edge.)

    Looking at the pieces I have left over, it's impossible to tell where they're from - I got a load of Lego from my big cousin in the very early 80s, but it seems to be a lot of incomplete sets.

  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,653
    @Jram  That print only came in one set according to BL.  http://alpha.bricklink.com/pages/clone/catalogitem.page?P=3009pb156#T=C
  • flordflord CanadaMember Posts: 797
    Can anyone identify any sets in this pic? It's not much to go on, I know. Debating buying the whole bin. $200 CDN seem too much?


    pic.JPG 27.5K
  • AanchirAanchir United StatesMember Posts: 2,998
    The ship hull is from #7075 and the space shuttle nose is from #4467. NOt sure about the rest.
  • SprinkleOtterSprinkleOtter Member Posts: 2,778
    There's a 3182 Airport airplane nose in there. Can't tell much from the picture. I wouldn't say that $200 is too much, if stuff is complete.
  • Came64Came64 Member Posts: 50
    There's a part of the für Helikopter #7206 .
  • MattsWhatMattsWhat Studley, UKMember Posts: 1,643
    Image is too small to go to town identifying stuff, but at that kind of money I have one question -  are the minifigures in there? Although city minifigures are not overly valuable, a family who have kept them all in the box tends to fit well with one that won't have lost every piece smaller than 2x4 in my experience. 
    catwrangler
  • flordflord CanadaMember Posts: 797
    Thanks for the responses. Waiting to hear back from the seller.
  • ElkkthunderElkkthunder Member Posts: 48

    Any help with id or set
  • Came64Came64 Member Posts: 50
    Jram said:
    Hi, first post. Putting together all my sets prior to selling, and have some pieces that I can't find/identify on Peeron.

    Does anyone know if these Shell bricks are from the same set, or different ones?
    If you look at the undersides, you'll see that one has two supports (on pillars 2 and 4, flush with the bottom edge) and one has a central support (which stops short of the bottom edge.)

    Looking at the pieces I have left over, it's impossible to tell where they're from - I got a load of Lego from my big cousin in the very early 80s, but it seems to be a lot of incomplete sets.

    oldtodd33 said:
    @Jram  That print only came in one set according to BL.  http://alpha.bricklink.com/pages/clone/catalogitem.page?P=3009pb156#T=C
    But Bricklink isn't always right.
  • MattsWhatMattsWhat Studley, UKMember Posts: 1,643
    edited January 2016


    Is that post-it an existing part? I can't find it on casual looking so I thought I would throw it out to you knowledgable lot.
    Edit for clarification: not from a set photo, this is an image from lego club email.

  • AanchirAanchir United StatesMember Posts: 2,998
    edited January 2016
    MattsWhat said:

    Is that post-it an existing part? I can't find it on casual looking so I thought I would throw it out to you knowledgable lot.
    Edit for clarification: not from a set photo, this is an image from lego club email.

    It's a printed 1x1 tile, but yes, it's a brand-new print for the 2016 LEGO Friends sets. It also appears in Olivia's Exploration Car.
    MattsWhatandhekiki180703The_Mad_Vulcan
  • MattsWhatMattsWhat Studley, UKMember Posts: 1,643
    Thanks @Aanchir I skimmed through the pictures of friends but couldn't see it. Really fun piece, hope it turns up on B&P. 
  • NicksBricksNicksBricks United StatesMember Posts: 301
    Looking for helping identifying this part.  Thank you.


    part.png 111.3K
  • ColoradoBricksColoradoBricks Denver, CO, USAMember Posts: 1,659
  • NicksBricksNicksBricks United StatesMember Posts: 301
  • BrotherBrainBrotherBrain New York CityMember Posts: 16
    After scouring the bricklink catalog I am still unable to identify this Lego element. Please help!



    Some background info:
    I purchased this piece from a wonderful Lego shop called AA Place in Hong Kong. In addition to a great selection of new and retired sets they have a wall of individual elements available for purchase and that's where I found this one. The store is very reputable and I do not believe they would knowingly sell any knock off elements. It has "Lego" moulded at the bottom of the slope on the top of the brick. I could not find an element ID anywhere but the bottom has what looks like "2-03" moulded next to one of the tubes.

    Thanks in advance to anyone who can help!
  • ColoradoBricksColoradoBricks Denver, CO, USAMember Posts: 1,659
  • BrotherBrainBrotherBrain New York CityMember Posts: 16
    That's it! Thank you!
  • mcvitiemcvitie Sheffield, EnglandMember Posts: 292
    Does anyone know the part number for the 1x1 quad slope that I think is new this year and features in some of the Nexus Knights sets?
  • TigerMothTigerMoth Member Posts: 2,343
    mcvitie said:
    Does anyone know the part number for the 1x1 quad slope that I think is new this year and features in some of the Nexus Knights sets?
    The solid colours are 22388; the transparent ones are probably something else.
  • sdetskysdetsky Member Posts: 35
    I thought I was pretty good at scouring the parts catalogue at Bricklink but this one has me stumped.  Hopefully the ninjas here can help.
  • OldfanOldfan Chicagoland, IL, USAMember Posts: 700
    http://alpha.bricklink.com/pages/clone/catalogitem.page?P=2464&idColor=5#T=C&C=5

    This one?  If not, a picture from a different angle might be helpful, too.

  • sdetskysdetsky Member Posts: 35
    ^ Thank you.  Not sure how I missed that.  It's odd that in a bulk buy where every part is from an identified set from 2012-present that a random piece contained in one set from 1994 was included!
  • AdelecAdelec UkMember Posts: 171
    Does anyone recognise this? Is it even Lego? I found it with a small batch of batman Lego. But I can't find it in any sets. There is a mark in it, but very difficult to see. May be an 11 or z. Any help would be great.
  • BumblepantsBumblepants DFW/BGMember Posts: 7,499
    edited February 2016
    ^My guess is that it is not Lego. Does it have a Lego brand marking and part number anywhere on it? If not it probably came from something else. Could be a Hero Factory/Bionicle thing but I am not that familiar with that system.
  • andheandhe UKMember Posts: 3,857
    It looks like the nose cone from batmobile on the animated series 'Batman: The brave and the bold'. I imagine it fires off the toy, but I'm not aware of any lego sets from that series.
  • AdelecAdelec UkMember Posts: 171
    Ok thanks, I will mark it down as non lego and bin it. 
  • AanchirAanchir United StatesMember Posts: 2,998
    Sometimes if you come across a Batman-looking part that doesn't quite look like LEGO, it might be from one of the McDonalds toys based on the LEGO Batman video game. I've seen those turn up in mixed LEGO lots before. But yeah, this one just looks non-LEGO.
    77ncaachamps
  • SprinkleOtterSprinkleOtter Member Posts: 2,778
    I found some CMF stands without the LEGO logo on the studs today. That means that they are fakes, right?
  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,653
    Yes.
  • SprinkleOtterSprinkleOtter Member Posts: 2,778
    Kriff. That means four of the decently valuable minifigures I found are fakes...
  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,653
    Most likely. Check the torso studs to see if they have the Lego logo on them.
  • 77ncaachamps77ncaachamps Aspiring Time Traveler Stuck in the West (US)Member Posts: 2,442
    Trev5374 said:
    Hello everyone. Can anyone tell me what sets these are part of?

    Thanks so much...


    The dimples on the studs surely mean it's not a Lego piece.

    it looked like a Halo Mega Bloks piece but I couldn't find one that matched.
  • SprinkleOtterSprinkleOtter Member Posts: 2,778
    I just got something similar. Its called "Dragon Universe" or something like that.
  • SprinkleOtterSprinkleOtter Member Posts: 2,778
    I also have an unprinted clear TIE fighter canopy- is that a misprint?
  • LyichirLyichir United StatesMember Posts: 1,005
    I also have an unprinted clear TIE fighter canopy- is that a misprint?
    No. This set had an unprinted one. Possibly others as well: http://brickset.com/sets/4888-1/Underwater-Exploration
  • MattsWhatMattsWhat Studley, UKMember Posts: 1,643
    I don't have a part to identify but do have a a question. Going through a random bulk lot and have come across 18 white 1x4 with hinge upper only. No bottoms at all. Part number is 2430 (written on). Any suggestions as the quantity without finding a single bottom half?!
  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,653
    If I remember correctly, they used to come assembled in the old sets but don't any longer. Which leads me to believe it was part of a PAB wall element. 
    MattsWhatkiki180703
  • MattsWhatMattsWhat Studley, UKMember Posts: 1,643
    ^I guess they could have come from pab, but nothing else in the lot suggests that, no other parts in large quantities. They are fantastic for mocing as they fit into hollow studs (like on a jumper) but they previous owner really didn't appear to be an afol.
  • TigerMothTigerMoth Member Posts: 2,343
    It sounds like one bag from the Taj Mahal. There's 36 of both 2429 and 2430. These days, they come assembled; until about 2008, the time of the Taj, they didn't.
    MattsWhatkiki180703
  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,653
    ^ Except he stated he doesn't have the other half. Which pretty much negates the pieces he has coming in a set unless they were separated from each other and the other half is lost. 
Sign In or Register to comment.

Shopping at LEGO.com or Amazon?

Please use our links: LEGO.com Amazon

Recent discussions Categories Privacy Policy Brickset.com

Howdy, Stranger!

It looks like you're new here. Sign in or register to get started.

Brickset.com is a participant in the Amazon Services LLC Associates Program, the Amazon.com.ca, Inc. Associates Program and the Amazon EU Associates Programme, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.

As an Amazon Associate we earn from qualifying purchases.