Shopping at LEGO or Amazon?
Please use our links: LEGO.com Amazon
As an Amazon Associate we earn from qualifying purchases.

New parts discussion

2456716

Comments

  • AanchirAanchir United StatesMember Posts: 2,809
    binaryeye said:
    Ah, yes. Clipped to one of these. I thought it was all one piece and was a bit confused about what it could be used for otherwise.
    I made the same mistake when I first saw pics of that set! I needed my brother to point out to me what it really was. Pretty clever technique!

    Someone on Facebook pointed out to me that some of the new Friends sets have a new 4x8 half-circle plate (like two of the quarter-circle plates put together). It's in white in #41119 and in Bright Yellowish Green (Lime) in #41113.

    Some of the Mighty Micros sets like #76061 have a new wheel arch. Possibly 4x4?

    And someone on Eurobricks pointed out that #21126 has new longer skeleton legs (like Woody's legs from Toy Story, but for skeletons).
  • TwiddlepottsTwiddlepotts Oregon, USAMember Posts: 5
    Here are a couple that I found. I'm thinking they are new pieces, if not, please let me know. Sorry that the pics aren't better.

    The 1x1 pyramid. I could use a couple hundred of these! 
    The chain isn't new but I love the trans orange.

    These are made like the big teeth but these brown beauties are much larger.  Also have to love the tan unikitty tails.


    Most of the items in this pic are new colors. 
    Blue flame large. (Are these the flame wings or a new mold)
    New colors for flowers, head, sm leaves, and stem. Do you think those flowers are pearl?
    what is holding the leaves to the house? Ummm.        Fun ahead!


    All I have to say is "round teeth".


  • PaperballparkPaperballpark UK / KLMember Posts: 3,454
    The 'round teeth' look like squared-off 1x1 round tiles to me.
  • TwiddlepottsTwiddlepotts Oregon, USAMember Posts: 5
    The 'round teeth' look like squared-off 1x1 round tiles to me.
    Either that or like 15070 1x1 with vertical tooth. I just can't tell which.
  • wardmwardm BelgiumMember Posts: 562
    @Twiddlepotts I noticed the pyramid too but in trans-orange in #30372 
  • TwiddlepottsTwiddlepotts Oregon, USAMember Posts: 5
    wardm said:
    @Twiddlepotts I noticed the pyramid too but in trans-orange in #30372 
    Yes! Trans orange, gold and silver!
  • JenniJenni JapanMember Posts: 1,382
    @Twiddlepotts the yellow flowers in your picture are just the regular ones we've had forever but I believe the pale blue and darker purple ones are new.

    The limbs are attached by the small domed pieces they put on flick missiles.

    The blue flames are the same piece as Eris' wings in 70224.

    There are pink ice cream cones inside, is that a new color?

    I'm calculating how long I'll have to wait before I can remove the white limbs without my daughter noticing :). 


  • wardmwardm BelgiumMember Posts: 562
    Jenni said:
    The limbs are attached by the small domed pieces they put on flick missiles.
    Really? I thought it were the diamond pieces...
  • LostInTranslationLostInTranslation UKMember Posts: 5,520
    Nope definitely the "barraki eye" piece.
    In the Arendelle castle set,  the flower piece is new in bright light blue and medium lavender.  The flower stem I'd new in lilac. The 1x6 tiles with the geometric pattern are printed.  The white limbs are new.  There's a new 1x2x1 panel piece with sides used in  various colours in new sets.  Think some of the aqua slopes are new in that colour too. 
    wardmkiki180703
  • TwiddlepottsTwiddlepotts Oregon, USAMember Posts: 5
    Rebrickable has some of the sets up now. lostinTranslation is right, they are trans light blue barraki eyes. There is another new piece listed that I'm excited about. 23969

  • wardmwardm BelgiumMember Posts: 562
    I received my prison island yesterday! the new giant rock piece is hollow (thank God!) and there was also a new piece for the bottom part of the balloon: a 6x2 plate with rounded corners (two times in black!)
    catwrangler
  • TigerMothTigerMoth Member Posts: 2,343
    wardm said:

    there was also a new piece for the bottom part of the balloon: a 6x2 plate with rounded corners (two times in black!)
    This?

    http://brickset.com/parts/design-18980

    Not new.
  • canon03canon03 USAMember Posts: 323
    TigerMoth said:
    wardm said:

    there was also a new piece for the bottom part of the balloon: a 6x2 plate with rounded corners (two times in black!)
    This?

    http://brickset.com/parts/design-18980

    Not new.
    ^ Wouldn't a part that was first introduced in the current year still be considered new?
  • TigerMothTigerMoth Member Posts: 2,343
    Not in a 2016 set.

    And by the same token, it was available at the end of 2014.
  • wardmwardm BelgiumMember Posts: 562
    Thanks @TigerMoth I hadn't seen that part yet... 
  • TwiddlepottsTwiddlepotts Oregon, USAMember Posts: 5
    wardm said:
    I received my prison island yesterday! the new giant rock piece is hollow (thank God!) and there was also a new piece for the bottom part of the balloon: a 6x2 plate with rounded corners (two times in black!)
    Thank you for sharing!  Could you post a pic of the BURP?

    that set looks like fun. It is one on my list.
  • TigerMothTigerMoth Member Posts: 2,343
    edited January 2016
    .
    kiki180703
  • DadsAFOLDadsAFOL USAMember Posts: 616
    Some of the new parts auto-loaded to the database: http://brickset.com/parts/new-03-01-16.  There are some that haven't added yet from discussion in this thread.  But there are a couple of interesting new things...

    A "couch" panel

    A "blast door"

    Also some useful recolors of existing parts...

    Tan prickly bush (great for desert scenes)


    Red and yellow Technic axles

    Tan small wedge plate (will make military builders happy)


    Mynattkiki180703wardm
  • FauchFauch FranceMember Posts: 2,296
    the "blast door" isn't the same mold than in death star final duel?

    I think vampyre castle has a tan bush
  • TigerMothTigerMoth Member Posts: 2,343
    Fauch said:
    the "blast door" isn't the same mold than in death star final duel?

    I think vampyre castle has a tan bush
    The "cockpit" (tha's what TLG call it) appears in a number of sets, but it's always been printed. Technically, that makes this "new".

    The bushes in Vampyre Castle are sand yellow; this is brick yellow.
  • MynattMynatt OH/NYMember Posts: 569
    DadsAFOL said:
    A "couch" panel


    The couch panel seems like a really cool piece. Even though it is just two of part 6231 (http://brickset.com/parts/design-6231) it does have quite a bit of potential. 
  • MynattMynatt OH/NYMember Posts: 569
    It also appears that in the new Mighty Micro visuals there are new wheel bases and arches. 

    Arches:


    Bases:

  • pagerdpagerd Member Posts: 2
    Judging by part numbers, set 41141 has 5 new parts:


    12 of 79 pieces are new this year. Is there a set with a better ratio?

  • CCCCCC UKMember Posts: 17,818
    Yes, many CMFs are about 85% new parts (obviously the stand is not new for all).
  • catwranglercatwrangler Northern IrelandMember Posts: 1,791
    I'm excited about the blast door and the tan bush!
  • TigerMothTigerMoth Member Posts: 2,343
    I'm excited about the blast door and the tan bush!
    I'm sure a lot of people would be excited about a tan bush.
    catwranglerMynattAllBrickTheMaker37
  • catwranglercatwrangler Northern IrelandMember Posts: 1,791
    TigerMoth said:
    I'm excited about the blast door and the tan bush!
    I'm sure a lot of people would be excited about a tan bush.
    I sensed this would happen but decided the post would be my gift to whoever saw fit to reach out and take it. :P
    Mynattkiki180703GothamConstructionCo
  • PaperballparkPaperballpark UK / KLMember Posts: 3,454
    I want a red bush.
  • CCCCCC UKMember Posts: 17,818
    Rooibos tea?
    kiki180703wardmbinaryeyeAllBrick
  • Pumpkin_3CK5Pumpkin_3CK5 CaliforniaMember Posts: 768

    Closer look of that round tooth piece.


    Are those spike things new? If not, what part name/number?
  • PaperballparkPaperballpark UK / KLMember Posts: 3,454
    Look at this new 1x1 curve tile (Melon piece). Interesting!


    MynattwardmSirBenkiki180703snowhitie
  • wardmwardm BelgiumMember Posts: 562

    new arched parts? 
  • MattsWhatMattsWhat Studley, UKMember Posts: 1,643
    ^isn't that just a regular inverse slope hidden behind a wheel arch piece?
    kiki180703Mynatt
  • PaperballparkPaperballpark UK / KLMember Posts: 3,454
    Yes it is. Had me fooled for a second though.
  • wardmwardm BelgiumMember Posts: 562

    @MattsWhat lol! it is indeed haha!
  • LyichirLyichir United StatesMember Posts: 727
    Haven't seen anyone comment on this here yet, but we're getting inverse "baby bows" (1x2x2/3 curved slopes) in at least one of the Elves sets (Fire Dragon's Lava Cave, on the dragon's hind legs). They've also been sighted on the Ninjago Lighthouse Siege in the summer (on the corners of the roofs). Seems like it'll be a very useful part.
  • DadsAFOLDadsAFOL USAMember Posts: 616
    New from the GB reveal today...  a 1x1 round plate with bar/handle.

    catwranglerkiki180703wardmNeilCrosbyMynattsnowhitie
  • LyichirLyichir United StatesMember Posts: 727
    edited February 2016
    DadsAFOL said:
    New from the GB reveal today...  a 1x1 round plate with bar/handle.

    Yup! You can also see that piece in the summer Marvel sets, to attach the new "web-slinging" piece for Spider-Man.
  • PaperballparkPaperballpark UK / KLMember Posts: 3,454
    Ahh! I think it's clearer to see in the Ecto1 though. There's a load of other parts in new colours too, including 1x1 round tiles in black, which I REALLY REALLY NEED! :D I'm so happy about that.
  • wardmwardm BelgiumMember Posts: 562
    I LOVE the new hair moulds for the female characters from GB!!
  • MeltE2MeltE2 CanadaMember Posts: 0
    Saw this cool new part on the bumper of http://brickset.com/sets/60122-1/Volcano-Crawler-Vehicle . Seems to be http://brickset.com/parts/design-11090 but with a 3.2mm bar, so that should be pretty useful. Also, there's a new pointy type of thing on the end of the drill, and the grill on the front looks like a new mold as well.

    Lyichirkiki180703Mynatt
  • CM4SCM4S United StatesMember Posts: 1,290
    ^ WAIT, YES!!! 
  • AanchirAanchir United StatesMember Posts: 2,809
    MeltE2 said:
    Saw this cool new part on the bumper of http://brickset.com/sets/60122-1/Volcano-Crawler-Vehicle . Seems to be http://brickset.com/parts/design-11090 but with a 3.2mm bar, so that should be pretty useful. Also, there's a new pointy type of thing on the end of the drill, and the grill on the front looks like a new mold as well.

    Good spotting. I had seen the grille part on one of the smaller volcano research sets but must have missed the first part you mentioned. Seems really useful!

    However, the pointy bit at the end of the drill is probably just one of these.
  • LostInTranslationLostInTranslation UKMember Posts: 5,520
    I seem to recall the lady at the London toy fair saying something about a new drill piece but I didn't pay too much attention to the Volcano sets. 
  • wardmwardm BelgiumMember Posts: 562
    new windscreen type of thing? And that larger (pearl?) grey piece? 

    I think this piece also comes with the black panther jet (in black ofc.)

    I just wanted to know how this was made, cause it seems clever work... 

    black panther 'ears' in white! 

    New helmet for inquisitor... Hope we'll get the female one too later on (AND WHERE IS AHSOKA???)

    The blue part above the wings is new, I guess and the wings are in a new colour!


    Are all those new? (or new colours?)
    Thanks guys!
  • AanchirAanchir United StatesMember Posts: 2,809
    The 4x6 windscreen and 4x4 wedge from Nexo Knights are well known at this point, since they've been in several sets. The 8-wide wedge on the front the Thunder Mace is new for summer, though.

    The air intakes on the Aero-Striker V2 are not too complex, and it's a technique I've seen on MOCs before. It's two of these and two of these.

    Blue Beetle's wings are this in a new color, but the Bright Blue wing covers are new.
  • wardmwardm BelgiumMember Posts: 562
    @Aanchir thanks again! 
  • PaperballparkPaperballpark UK / KLMember Posts: 3,454
    Ooooh! Does anything else fit onto it? What's the underside of it like? It seems to me like the 'extended stud' may be out of system.
    Galactus
  • wardmwardm BelgiumMember Posts: 562
    I'm happy to say that the new 'cat ears' headgear piece from the blakc panther minifig is made with a harder type of plastic than the darth maul piece from a while ago. It fits better! 
Sign In or Register to comment.

Shopping at LEGO.com or Amazon?

Please use our links: LEGO.com Amazon

Recent discussions Categories Privacy Policy

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Brickset.com is a participant in the Amazon Services LLC Associates Program, the Amazon.com.ca, Inc. Associates Program and the Amazon EU Associates Programme, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.

As an Amazon Associate we earn from qualifying purchases.