Power Functions with #10244 and #10247

Comments

• Mynatt Member Posts: 632

  November 2015 edited November 2015

  One of the cheaper ways to have them at 2 different speeds is to have two battery boxes and two medium sized motors. #88000 #8883

  0
• kiki180703 Member Posts: 1,064

  November 2015 edited November 2015

  If you already have a speed regulator (like the ones used with 9V trains), try this:
  https://youtu.be/ZctKgZIgFdw
  It uses only one motor but the two rides are at different speeds.

  

  2
• ecmo47 Member Posts: 2,101

  November 2015

  Power functions are not hard to figure out. First of all, both sets of instructions show you exactly how to hook in a motor and battery box. On both, the gearing takes care of the proper speed and all you have to do is turn the battery box on and off. You could run both motors of the same battery box if desired. If you want to "control" the speed, just add a #8884 Lego IR receiver to each set-up. The last thing you would then need is a #8879 IR speed controller which can independently both motors. 

  

  2
• ecmo47 Member Posts: 2,101

  November 2015

  opps....independently operate both motors.

  

  1
• ChiefCubby Member Posts: 10

  November 2015

  Ecmo47, thank you. I guess that was another thing i was wondering, about needing only 1 or 2 battery boxes. I just saw the shop.lego.com sells extension cords for power functions as well. That'd be nice. I want them close, but not on top of each other. Thanks everyone. 

  0
• Sethro3 Member Posts: 1,016

  November 2015

  I was wondering these same things. Thanks for the answers. I recently bought Ferris Wheel for my daughter and am currently building the Carousel. I wanted to control the speeds considering in videos it seems the power functions they recommend make the sets go waaaaaay too fast.
  
  So all I need to do is hook up an IR receiver to the battery box essentially? As opposed to just hooking up the battery box?
  
  Looks like I need to make another power functions purchase. I just bought some for a train I'm working on. I'm also very new to power functions. I'm sure they are easy to understand, but since I've never been exposed to them before, this is all a learning curve for me.
  

  0
• ChiefCubby Member Posts: 10

  December 2015 edited December 2015

  Sethro3, I agree about the speed. When I bought the Ferris Wheel set, I envisioned a very slow turn, much like the Navy Pier wheel in Chicago, enough speed to keep you interested, but also slow enough to catch all of the sights. 

  0