Shopping at LEGO or Amazon?
Please use our links: LEGO.comAmazon
As an Amazon Associate we earn from qualifying purchases.

[Master thread] Help identifying parts, sets and minifigs

15051535556108

Comments

  • Pumpkin_3CK5Pumpkin_3CK5 CaliforniaMember Posts: 805
    TigerMoth said:
    Don't count on it! If it is a replacement, then if you request one you might be sent the other. If you really want the newer one, waiting might help. If you really want the older one, then cross your fingers.
     I bought them both just in case and within two days they sent me an email saying it's been shipped(which is pretty fast) so we'll see!
  • steinbriquesteinbrique germanyMember Posts: 29
    Hello ,

    Can anybody help with this part ? I got them on a lot but can´t find them on Bricklink.

    Thank you
  • binaryeyebinaryeye USMember Posts: 1,810
    Can anybody help with this part ? I got them on a lot but can´t find them on Bricklink.
    I believe it's the piece that normally has the head and arms attached in the old maxifigs. For example in #199.
    Bumblepantssteinbriquekiki180703
  • steinbriquesteinbrique germanyMember Posts: 29
    binaryeye said:
    Can anybody help with this part ? I got them on a lot but can´t find them on Bricklink.
    I believe it's the piece that normally has the head and arms attached in the old maxifigs. For example in #199.
    Thank you ! mine are apparently without the arm holder.
  • datsunrobbiedatsunrobbie West Haven , CTMember Posts: 1,802
    Does anybody out there have #6199 Hydro Crystallization Station? I picked up a couple of bags of parts at the local thrift store yesterday, and they seem to be most of this set. There was a loose baseplate on the shelf that I ignored because it did not have LEGO on the studs. Pictures I have found several pictures of the baseplate online, and I cannot see the logo on the studs. I'm heading back over this afternoon to pick up the baseplate, was hoping someone could confirm that there are no logos on the studs.
  • TheBrickLaddTheBrickLadd Chippenham, Wilts, UK.Member Posts: 844
    Anybody have any idea what part the white long thing is?


  • BumblepantsBumblepants DFW/BGMember Posts: 7,503
    edited October 2016
    ^I think it might be Boat Mast 2 x 2 x 3 Inclined with Stud on Top and Two Sides part 4289

    TheBrickLadd
  • BobflipBobflip Member Posts: 701
    Found this in a Bionicle job lot, any thoughts on what it's from?
    I'm confused because as far as I can tell, the orange 41672 Bohrok Shoulder with fan was only in #8556 Boxor, and the dark blue 32177 Technic Beam with fan was only in #8009 R2D2. Also they only appeared once in each set and there's no other signs of the previous owner having 4 R2D2s, so it seems unlikely they came from those!


  • AanchirAanchir United StatesMember Posts: 2,998
    Bobflip said:
    Found this in a Bionicle job lot, any thoughts on what it's from?
    I'm confused because as far as I can tell, the orange 41672 Bohrok Shoulder with fan was only in #8556 Boxor, and the dark blue 32177 Technic Beam with fan was only in #8009 R2D2. Also they only appeared once in each set and there's no other signs of the previous owner having 4 R2D2s, so it seems unlikely they came from those!
    Maybe they got them secondhand, either online, at an event, or even from somebody else's job lot. Unless there were some bulk parts bucket that included these parts and was never inventoried on BrickLink. This assembly is not from any set or MOC I recognize. Neither of these parts is terribly expensive on BrickLink, so getting four of each is not unbelievable.

    R2-D2 actually had two of those Earth Blue beam pieces, btw. So they'd only have needed two.
  • BobflipBobflip Member Posts: 701
    Ah yeah, my mistake on R2D2... I researched it last night when knackered and typed it up today when marginally more focussed. From the other contents I'm thinking a bucket is the more likely source.
  • TigerMothTigerMoth Member Posts: 2,343
    Bobflip said:

    41672 Bohrok Shoulder with fan was only in #8556 Boxor, and the dark blue 32177 Technic Beam with fan was only in #8009 R2D2. Also they only appeared once in each set and there's no other signs of the previous owner having 4 R2D2s, so it seems unlikely they came from those!
    41672 in Bright Orange was in #8556, #8711 and #8713.

    32177 in Earth Blue was in #8009 and (therefore also #65081).
  • BobflipBobflip Member Posts: 701
    That probably nails it. I'm figuring the fans arrived in the tub as well. I forgot that Rebrickable doesn't take parts packs like that into account. Where did you find out that the 41672 came in those two buckets?
  • TigerMothTigerMoth Member Posts: 2,343
    Peeron - often the best place to look for older stuff.
  • BobflipBobflip Member Posts: 701
    Thanks, will keep it in mind, it's always one I overlook!
  • bookmumbookmum londonMember Posts: 1,454
    A couple of years ago I bought a mixed bag of bits. I have always been curious whether these are Belville or scala. 

  • vizzitorvizzitor IrelandMember Posts: 469
    edited October 2016
    It looks like they are Belville, from #7586.
  • bookmumbookmum londonMember Posts: 1,454
    Thanks. 
  • stluxstlux LuxembourgMember Posts: 2,450
    Came across the below while sorting through my 80's Lego. I thought it should be part of a 12V train set, but my search comes up empty: 


    catwranglerkiki180703
  • DontcopythatfloppyDontcopythatfloppy 'MuricaMember Posts: 43
    edited October 2016
    I'd assume it's been modded with Lifelites or something of the sort, given that I've never seen such delicate electronics exposed in a set before, and especially not threaded through a piece like that.
    catwranglerkiki180703
  • catwranglercatwrangler Northern IrelandMember Posts: 1,894
    These look awesome; thanks, @Dontcopythatfloppy! (Link is broken but this should work: http://lifelites.com)

    When I was a kid my mum and I worked on a doll's house which we always meant to illuminate - at one point we even bought the kit, but never got round to actually doing it. I don't want to repeat that with my Lego, so will definitely be looking into this...
  • stluxstlux LuxembourgMember Posts: 2,450
    It comes straight out of one of my 80's childhood Lego boxes, and the connection points are all authentic Lego. I don't remember my dad ever doing any soldering, and both him and us kids were more akin to Lord Business/The Man Upstairs than Finn - non-Lego didn't enter the Lego table...
    I have started to wonder if at least the cables come from an accessory pack like #7861 or a service pack. Still coming up empty in my search though.
  • oldtodd33oldtodd33 Denver 4800 miles to BillundMember Posts: 2,653
    @stlux   The parts are Lego but Lego never did anything like that. That is all a modification done by someone. http://www.bricklink.com/catalogItemIn.asp?P=765c01&in=S
    stlux
  • stluxstlux LuxembourgMember Posts: 2,450
    Thanks @oldtodd33! I'll stop looking for the set to match these parts to then. I don't recall any non-100%-pure Lego ever gracing our Lego room, but I must have been to small to remember...
  • ColoradoBricksColoradoBricks Denver, CO, USAMember Posts: 1,659
    looks like part of the seats of set 292-2
  • TheBrickLaddTheBrickLadd Chippenham, Wilts, UK.Member Posts: 844
    ^I think it might be Boat Mast 2 x 2 x 3 Inclined with Stud on Top and Two Sides part 4289

    Thanks!!
  • The_Mad_VulcanThe_Mad_Vulcan SeattleMember Posts: 162
    stlux said:
    I don't remember my dad ever doing any soldering, and both him and us kids were more akin to Lord Business/The Man Upstairs than Finn - non-Lego didn't enter the Lego table...
    It sounds like you want to have a talk with your mom. Perhaps she was doing a test? It's easier to mock something up with LEGO bricks and take it down later.
  • stluxstlux LuxembourgMember Posts: 2,450
    looks like part of the seats of set 292-2
    Thanks! That explains the blue bricks (and red tile). We had a couple of 70's sets, including some maxifigs.
    The light/electric pieces likely were attached to #292 by accident/when putting away in storage/self-attached in the parts bin.
    Mystery (mostly) solved now as I can unfortunately no longer ask my parents. Thanks everybody!
    catwrangler
  • beasty23beasty23 Member Posts: 62
    Hi bought a lot on local selling page and managed to identify most of the sets but struggle with these can anyone help please. Thank you 
  • ColoradoBricksColoradoBricks Denver, CO, USAMember Posts: 1,659
    Bottom Left is base for #5867
    stluxSprinkleOtterkiki180703Dontcopythatfloppy
  • ColoradoBricksColoradoBricks Denver, CO, USAMember Posts: 1,659
    edited October 2016
    Bottom right is from #76001
    2 on top and front middle right are from #6743
    Middle left is from #4995
    stluxSprinkleOtterkiki180703DontcopythatfloppyAllBrick
  • vizzitorvizzitor IrelandMember Posts: 469
    edited October 2016
    Edit: Never mind, too late. I didn't refresh the page to see ColoradoBricks had already got these before I had a chance.
  • beasty23beasty23 Member Posts: 62
    Wow amazing how you can identify all these just from couple of parts especialy #4995 just axle and wheel. Thank you very much for help.
  • spaceinvader1979spaceinvader1979 Barcelona - CataloniaMember Posts: 50
    Hello. I need your help with my dark friends...
  • gratefulnatgratefulnat SwitzerlandMember Posts: 421
    Hello. I need your help with my dark friends...
    all Star Wars figures, from left to right:

    Tie Defender Pilot sw268A or Tie Bomber Pilot sw457
    Hard to tell from the picture, and the torso seems to be incorrect (maybe from this figure, Imperial Pilot sw294 )

    Tie Fighter Pilot sw035 (old brown head) or sw035A (new reddish brown head)

    Imperial V-Wing Pilot sw304
  • spaceinvader1979spaceinvader1979 Barcelona - CataloniaMember Posts: 50
    Oh! Thank you very much, later i'll try to send a better picture from the left one...
  • spaceinvader1979spaceinvader1979 Barcelona - CataloniaMember Posts: 50
    The torso isn't correct?
  • GallardoLUGallardoLU USAMember Posts: 644

    take a look at set 9492, it looks like you have the torso and legs from the death star trooper, and the head and helm from the Tie Pilot. (both in that set)

    gratefulnat
  • gratefulnatgratefulnat SwitzerlandMember Posts: 421
    @spaceinvader1979, GallardoLU gave the answer to the confusion :-)
  • spaceinvader1979spaceinvader1979 Barcelona - CataloniaMember Posts: 50
    Thank you very much!
  • hazz78hazz78 UKMember Posts: 31
    I recently bought a job lot of lego parts.  I'm pretty sure that these are non-Lego.  However would appreciate some other views before I dispose of them.....

    Thanks!

  • TheFewTheFew EnglandMember Posts: 1,775
    Don't look like any lego i know!
  • DontcopythatfloppyDontcopythatfloppy 'MuricaMember Posts: 43
    I actually think that engine-looking thing might be a flamethrower pack from a Megab**cks Halo figure, but either way none of it's Lego.
  • BobflipBobflip Member Posts: 701
    These ring any bells?


  • datsunrobbiedatsunrobbie West Haven , CTMember Posts: 1,802
    Bobflip said:
    These ring any bells?


    Far right is the squeezeclaw grabber from
    http://brickset.com/sets/ISBN1591747694-1/Crazy-Action-Contraptions 
  • BobflipBobflip Member Posts: 701
    Aha... thanks!
  • Switchfoot55Switchfoot55 Yellowstone, 1883Member Posts: 3,160
    This was a random bit in a bin full of stuff I picked up this week. Most of the items were train/monorail pieces, so I assume it's related somehow?


  • AanchirAanchir United StatesMember Posts: 2,998
    This was a random bit in a bin full of stuff I picked up this week. Most of the items were train/monorail pieces, so I assume it's related somehow?
    Actually a classic pirate ship mast: http://www.bricklink.com/v2/catalog/catalogitem.page?P=4844
  • Switchfoot55Switchfoot55 Yellowstone, 1883Member Posts: 3,160
    ^That would explain the cannon that was in the bin too then!

    Thanks!
  • datsunrobbiedatsunrobbie West Haven , CTMember Posts: 1,802
    I spent a couple of hours searching all over for these parts and I'm at a loss. I found the forklift and the printed white 1x4, but the other 4 yellow pieces have me stumped. 
  • BobflipBobflip Member Posts: 701
    edited December 2016
    Looks like all the yellow bits are in this set:

    http://www.bricklink.com/catalogItemInv.asp?S=378-1

    The base is worth a bit as well!
    MooreFX
Sign In or Register to comment.

Shopping at LEGO.com or Amazon?

Please use our links: LEGO.com Amazon

Recent discussions Categories Privacy Policy Brickset.com

Howdy, Stranger!

It looks like you're new here. Sign in or register to get started.

Brickset.com is a participant in the Amazon Services LLC Associates Program, the Amazon.com.ca, Inc. Associates Program and the Amazon EU Associates Programme, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.

As an Amazon Associate we earn from qualifying purchases.