Ikea display coffee table.

smuggler68smuggler68 CanadaMember Posts: 2
New display from Ikea.  One was too small for the UCS falcon so went with 2.  Enough room for the falcon plus a few other models.  Installed led lighting which worked out great.
SumoLegoHugeYellowBrickSwitchfoot55The_RancorHanzoAstrobricksstluxstruddieOnebricktoomanyMrKettlerwsaleskiki180703AllBrickMr_CrossOldfanmadforLEGOBludchylde1Yo_dALEGOFan2TXLegoguynychromastonePisceanPetLittleLori

Comments

  • The_RancorThe_Rancor Dorset, UKMember Posts: 730
    Awesome find! But it looks like the Falcon did fit in one?
  • SumoLegoSumoLego New YorkMember Posts: 11,858
    It would appear the pointy thing sticks out of the side of the table by a few inches.
  • The_RancorThe_Rancor Dorset, UKMember Posts: 730
    edited September 2018
    Good thing it's so seamless I didn't notice!
    SeanTheCollector
  • Jern92Jern92 MalaysiaMember Posts: 799
    Are the sides closed?
  • Russell844Russell844 California, USAMember Posts: 1,822
    Which line is this from?
  • dehnehsudehnehsu Bay Area, Calif.Member Posts: 169
    edited September 2018
    Which line is this from?
    SAMMANHANG Coffee table ? $69.99      Size 27 1/2 x 27 1/2 "
    OnebricktoomanyRussell844kiki180703SeanTheCollectorMynattTXLegoguySumoLegoLittleLori
  • smuggler68smuggler68 CanadaMember Posts: 2
    Yes its the Sammanhang coffee table. $89.99 in Canada.  the sides are all enclosed with sliders at both ends so you can access easily.  I just took out the sliders on one end of both and pushed the two tables together to make enough room for the M.F.  I did have the Falcon on a special plexiglass stand I found from the U.K. and really liked it but was just nervous that it would eventually fall/fail somehow so wanted to display it in a safer way.
    Jern92
  • SumoLegoSumoLego New YorkMember Posts: 11,858
    (The dimension of the UCF MF is...?)
  • RecceRecce Tiny Little Red DotMember Posts: 888
    Nice!

    What's the internal shelf height? Looks to be at least 22cm to hold the MF?
  • dehnehsudehnehsu Bay Area, Calif.Member Posts: 169
    SumoLego said:
    (The dimension of the UCF MF is...?)
    LEGO states the Falcon is 33” (84cm) long and 22” (56cm) wide. I've read the actual width is more like 23.5" When I first saw the Table online at Ikea, I thought cool if the Falcon would fit inside but it's too long and as smuggler68 confirmed it won't fit an angle either.

    Still it's a nice affordable enclosed display for other large LEGO builds.
  • alfredotwoalfredotwo AZMember Posts: 2
    This looks great! What did you do for the lights? Are they battery operated or plugged in?
  • Mr_CrossMr_Cross East Anglia (UK)Member Posts: 992
    ...if I had any money, or enough space. uk price is £60 which seems very reasonable.
  • madforLEGOmadforLEGO Chicagoland USMember Posts: 9,331
    That would be neat for me to display all my poly bag sets or and seasonal sets into. Great for conversation starters
  • TokerToker CTMember Posts: 38
    dehnehsu said:
    SumoLego said:
    (The dimension of the UCF MF is...?)
    LEGO states the Falcon is 33” (84cm) long and 22” (56cm) wide. I've read the actual width is more like 23.5" When I first saw the Table online at Ikea, I thought cool if the Falcon would fit inside but it's too long and as smuggler68 confirmed it won't fit an angle either.

    Still it's a nice affordable enclosed display for other large LEGO builds.
    It's 23.5" wide. Take it from someone who bought a 23" table and realized that the Millennium Falcon didn't fit.
    dmcc0
  • colaycolay OxfordshireMember Posts: 328
    Wow, didnt see this thread before, that looks great.
    One slight issue, is you seem to have fitted the wrong radar dish on the MilF :)
    MaffyD
  • M1J0EM1J0E Calgary, ABMember Posts: 456
    That worked out great!  
  • RecceRecce Tiny Little Red DotMember Posts: 888
    I bought one to display my Ninjago setup with a monorail.


    brickventuresstlux560HeliportLittleLoriJenni
  • legoleppylegoleppy MarylandMember Posts: 71
    To rehash this thread, went to my local US ikea store and these tables are being discontinued in Feb 2020. But each store will have limited supply. You can go and have it shipped to your house for $59. That's a flat fee for everything thing you buy from them. The MiLF will be in this table in my basement when it gets finished!
    madforLEGOLittleLori
  • AstrobricksAstrobricks Minnesota, USMember Posts: 2,437
    I just checked online if this is at my local store and I see it is, and the price is now $79.99.
  • Russell844Russell844 California, USAMember Posts: 1,822
    Sold out at every store in California.
  • legoleppylegoleppy MarylandMember Posts: 71
    Go to the store and they should be able to ship it to your house from the warehouse. The shipping is 59 but the price is 79. Bought a crap ton of stuff and all the shipping was 59 for everything. 
  • Russell844Russell844 California, USAMember Posts: 1,822
    It told me the shipping was $10.
  • dutchlegofan50dutchlegofan50 Zwolle, NetherlandsMember Posts: 191
    legoleppy said:
    ... The MiLF will be in this table in my basement when it gets finished!
    In my vocabulary a MILF is something completely different. A small one would fit though....
    bpk2300madforLEGODadSumoLegoBludchylde1M1J0E
  • AstrobricksAstrobricks Minnesota, USMember Posts: 2,437
    legoleppy said:
    ... The MiLF will be in this table in my basement when it gets finished!
    In my vocabulary a MILF is something completely different. A small one would fit though....
    A MiLF is not a MILF :)
    gmonkey76Fizyxsid3windr
Sign In or Register to comment.
Recent discussions Categories Privacy Policy