Shopping at LEGO or Amazon?
Please use our links: LEGO.com Amazon
As an Amazon Associate we earn from qualifying purchases.

Lord of the Rings buildable sword in-store promo (LOTRSWORD-1)

pxchrispxchris Oregon, USAMember Posts: 583
I was looking through the forum and this has come up before - but does anyone have a scan of the instructions sheet (which I understand to just have been a photocopied/printed sheet to begin with) for the LOTRSWORD-1? It was a LEGO Store in-store promotion only back in 2012.

Or - does anyone have an accurate parts list?

What I was able to come up with based on photos/videos that are floating around is:

1x 50450 Black Technic, Axle 32
1x 3941 Dark Bluish Grey Brick, Round 2 x 2 with Axle Hole
7x 3941 Reddish Brown Brick, Round 2 x 2 with Axle Hole
1x 3738 Dark Bluish Grey Technic, Plate 2 x 8 with 7 Holes
2x 3298 Dark Bluish Grey Slope 33 3 x 2
18x 3941 Light Bluish Grey Brick, Round 2 x 2 with Axle Hole
1x 3942c Light Bluish Grey Cone 2 x 2 x 2 - Completely Open Stud

Assembled basically in that order from the base up.

I'm toying around with making my Lord of the Rings collection "officially" complete, so this would have to be one of the things I'd need to include with that in order to satisfy things in my mind.

Thanks!!
samiam391

Comments

  • dannyrwwdannyrww WisconsinMember Posts: 1,340
    If I recall when we went there was no instruction sheet per se other than in store how to build...it was part of a scavenger hunt....been a long time since, my daughter still has her sword though.

  • dannyrwwdannyrww WisconsinMember Posts: 1,340
    and we packed it up as we are moving....otherwise I would verify parts for you :( If no one else has helped you I'll check back in month when we are settled into our new place.
  • CCCCCC UKMember Posts: 18,149
    That looks right. There is a YouTube video of the build somewhere, I cannot post links right now.

    There are also two sticker sheets given out at the same time.
  • pxchrispxchris Oregon, USAMember Posts: 583
    I've seen the YouTube videos @CCC - unfortunately the quality is just poor enough that it's hard to verify.

    But I would still really appreciate a scan of the "instructions" that I've seen in at least one of the videos - it looks like a very simple 1 page 8-1/2x11 printed/copied sheet. It would just be a nice thing to have, and since I believe it was originally just a printed piece of paper, I wouldn't might printing my own copy and calling it "complete".

    Thanks again!!
  • pxchrispxchris Oregon, USAMember Posts: 583
    dannyrww said:
    and we packed it up as we are moving....otherwise I would verify parts for you :( If no one else has helped you I'll check back in month when we are settled into our new place.
    Much appreciated @dannyrww, thank you!
  • CCCCCC UKMember Posts: 18,149
    pxchris said:
    I've seen the YouTube videos @CCC - unfortunately the quality is just poor enough that it's hard to verify.

    But I would still really appreciate a scan of the "instructions" that I've seen in at least one of the videos - it looks like a very simple 1 page 8-1/2x11 printed/copied sheet. It would just be a nice thing to have, and since I believe it was originally just a printed piece of paper, I wouldn't might printing my own copy and calling it "complete".

    Thanks again!!
    I'm fairly sure they were either photocopies or prints run off in store. I didn't actually do it, but saw kids doing it and the instructions didn't look good quality.
    pxchrisLEGOFan2
  • pxchrispxchris Oregon, USAMember Posts: 583
    I added a Stud.io model for the sword to Bricklink for an easy parts list.

    https://studio.bricklink.com/v2/build/model.page?idModel=42967
  • BlueberryWafflesBlueberryWaffles MinnesotaMember Posts: 23
    I bought (or was given, don't remember) that sword from the Mall of America Lego Store way back when. Almost never hear it mentioned. I just got it out in front of me. Your model seems to be completely accurate. I wasn't given instructions with mine, I've never actually seen instructions for it.
    pxchris
  • pxchrispxchris Oregon, USAMember Posts: 583
    Thanks @BlueberryWaffles! The confirmation is really appreciated!
    LEGOFan2
Sign In or Register to comment.

Shopping at LEGO.com or Amazon?

Please use our links: LEGO.com Amazon

Recent discussions Categories Privacy Policy

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Brickset.com is a participant in the Amazon Services LLC Associates Program, the Amazon.com.ca, Inc. Associates Program and the Amazon EU Associates Programme, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.

As an Amazon Associate we earn from qualifying purchases.