Collecting certain parts only

Fodder

Every time I get this finished, Lego release a new colour - Yellow added since last update...

JudgeChuck

Nice! What colour are the ones at bottom-right? Are they pearl gold?

Fodder

JudgeChuck said:

Nice! What colour are the ones at bottom-right? Are they pearl gold?

Yep. Pearl Gold. I like them, but they don’t quite fit the colour-wheel type display that I’m going for.

The_Rancor

JudgeChuck said:

Nice! What colour are the ones at bottom-right? Are they pearl gold?

Introduced in General Grievous’ Overpriced Starfighter I believe

Astrobricks

 General Grievous had a lot of disposable income.

Paperballpark

Not enough for a UCS MF though...

stlux

The_Rancor said:

JudgeChuck said:

Nice! What colour are the ones at bottom-right? Are they pearl gold?

Introduced in General Grievous’ Overpriced Starfighter I believe

Actually already introduced in 2018's #853780 Creative Rings, and also present in last year's #40338 Christmas Tree and #70676 Lloyd's Titan Mech.

Getting used a lot since; in 16 sets by now.

The_Rancor

^ I didn’t notice it until it was used in a Star Wars set, which is pretty typical for me ;)

560Heliport

The_Rancor said:

^ I didn’t notice it until it was used in a Star Wars set, which is pretty typical for me ;)

Wait, you're a Star Wars fan? I'd never have guessed! 😀

KungFuKenny

Sausages!

This is all of them (for now), although Emmet and Lucy don’t look too pleased with their lunch...

DeMontes

Croissant anyone?

Paperballpark

I've spent a few hours updating my spreadsheet of available monochrome minifigs. It now says whether you can get each part plain or only printed, and if printed, there's a note saying which sets or themes that part is in.

https://www.dropbox.com/s/a8r22qag71j02r7/Monofigs%20Parts%20List.xlsx?dl=0&fbclid=IwAR2r16VURO6mm7YQSdS-rOxmu4sowg6j-WOrfoPBO8yCxAQPKd4_43Ykz_s

KungFuKenny

After sausages and croissants I thought I’d bring some cheese (slopes) to the table!

I think this is all of them, and I wish a new color would come out to even up the display... 🙂

Casper_vd_Korf

KungFuKenny said:

After sausages and croissants I thought I’d bring some cheese (slopes) to the table!

I think this is all of them, and I wish a new color would come out to even up the display... 🙂

You could change the proportions, I think 5x11 would fit. (Maybe not with the trans parts though)

Mr_Cross

Sgt. Orange has detected something extra in a recent arrival from @SumoLego.



Thanks @KungFuKenny, at some point, I will get around to updating my 1x1s. 

madforLEGO

Paperballpark said:

I've spent a few hours updating my spreadsheet of available monochrome minifigs. It now says whether you can get each part plain or only printed, and if printed, there's a note saying which sets or themes that part is in.

https://www.dropbox.com/s/a8r22qag71j02r7/Monofigs%20Parts%20List.xlsx?dl=0&fbclid=IwAR2r16VURO6mm7YQSdS-rOxmu4sowg6j-WOrfoPBO8yCxAQPKd4_43Ykz_s

Awesome list, you are missing one color though: BL 'Yellowish Green' (not lime.. its mostly Dr Phosphorus) I believe. While it cannot be completed yet (missing the hips in that color) the rest is available( though printed)

Paperballpark

madforLEGO said:

Paperballpark said:

I've spent a few hours updating my spreadsheet of available monochrome minifigs. It now says whether you can get each part plain or only printed, and if printed, there's a note saying which sets or themes that part is in.

https://www.dropbox.com/s/a8r22qag71j02r7/Monofigs%20Parts%20List.xlsx?dl=0&fbclid=IwAR2r16VURO6mm7YQSdS-rOxmu4sowg6j-WOrfoPBO8yCxAQPKd4_43Ykz_s

Awesome list, you are missing one color though: BL 'Yellowish Green' (not lime.. its mostly Dr Phosphorus) I believe. While it cannot be completed yet (missing the hips in that color) the rest is available( though printed)

No it's not missing - it's at the bottom of the 'Solid' colours, under Yellow :)

madforLEGO

Paperballpark said:

madforLEGO said:

Paperballpark said:

I've spent a few hours updating my spreadsheet of available monochrome minifigs. It now says whether you can get each part plain or only printed, and if printed, there's a note saying which sets or themes that part is in.

https://www.dropbox.com/s/a8r22qag71j02r7/Monofigs%20Parts%20List.xlsx?dl=0&fbclid=IwAR2r16VURO6mm7YQSdS-rOxmu4sowg6j-WOrfoPBO8yCxAQPKd4_43Ykz_s

Awesome list, you are missing one color though: BL 'Yellowish Green' (not lime.. its mostly Dr Phosphorus) I believe. While it cannot be completed yet (missing the hips in that color) the rest is available( though printed)

No it's not missing - it's at the bottom of the 'Solid' colours, under Yellow :)

My bad, did not recognize it by color.

AllBrick

One of my favourite threads here, and I’ve been so long I haven’t posted since the pages were in single digits. 

I shall dig out some bits and add to the pile again. 

Paperballpark

I've finally got round to taking a photo of my current monochrome minifig collection:

TheOriginalSimonB

^Drool.

Paperballpark

I've now got the four other Trans ABS figures I was missing:

The_Rancor

I don’t often see Star Wars specific posts in this thread but here goes - I recently created a Mandalorian Helmet display from “Minifigure, Headgear Helmet with Holes, SW Mandalorian” piece 87610:



Top l-r: Boba Fett, Trooper (pre-Maul Death Watch), Pre Vizsla, Super Commando (Maul Death Watch), Jango Fett
Middle l-r: Bounty Hunter (an imposter from Yoda Chronicles), Sabine Wren, Boba Fett (McQuarrie concept), Din Djarin (pre full Beskar)
Bottom l-r: Four Mandalorian Coven members from Nevarro, Din Djarin (full Beskar)

I think my favourites are still Pre Vizsla and the Super Commando - very stylish prints. And no, I’m not counting unprinted helmet moulds in weird colours. This is the way.

Switchfoot55

^Well, thanks a lot...

Off to BL to start a new Wanted list.

DeMontes

Collection of LEGO hole punchers 😬

CCC

The_Rancor said:

Where are the white range finders?

560Heliport

CCC said:

The_Rancor said:

Where are the white range finders?

You're looking at them! Rancor has all the white rangefinders in existence! :)

Tkatt

560Heliport said

Where are the white range finders?

You're looking at them! Rancor has all the white rangefinders in existence! :)

  The sprue that Voldemort's wand comes on can be modified with a little cutting to turn it into a range finder.  It doesn't hold on for play. It will attach to that tiny helmet hole though and works ok for display. It's not perfect, but it is official LEGO.

KungFuKenny

Here are all of part 30238, “Spider with Round Abdomen and Clip”...

I had wanted to have them by Halloween last fall, but better late than never!

JudgeChuck

@KungFuKenny Very nice! :-)

But, ooh, you swine! I was just one away from finishing that collection myself and presenting it here! ;-)

KungFuKenny

JudgeChuck said:

@KungFuKenny Very nice! :-)

But, ooh, you swine! I was just one away from finishing that collection myself and presenting it here! ;-)

Ha!  Sorry about that - don’t let me stop you from posting yours as well.  Maybe we should coordinate our efforts in the future! :-)

JudgeChuck

@Fodder Sorry to be the bearer of bad tidings, but they've released another flower colour:

Light Bluish Gray Plate, Round 1 x 1 with Flower Edge (5 Petals)

At the moment, as far as I can tell, it is only available in one set: #4002020

Fodder

@JudgeChuck thanks for the heads-up.
It was only a matter of time before another colour was released. 
Let the hunt begin.

JudgeChuck

Fodder said:

@JudgeChuck thanks for the heads-up.
It was only a matter of time before another colour was released. 
Let the hunt begin.

Yes, same here. I had only recently completed the available ones as well.

Istokg

DeMontes said:

Collection of LEGO hole punchers 😬

Just got done adding the Muji promotional LEGO sets of 2009-2011 to my Unofficial LEGO Sets/Parts Collectors Guide, and boy are those Muji hole punchers expensive... $100+ each!!  :-O

Spidrax

I collect old space parts.

Paperballpark

You should do a display of every element in White, Grey, and Blue, all lined up neatly in rows :)

DeMontes

Paperballpark said:

You should do a display of every element in White, Grey, and Blue, all lined up neatly in rows :)

I concur...please 

Spidrax

That would take entirely too long!

Here are some 1x1 plates. Three systems, three logos... and two prototypes :)

DeMontes

Snap!

Spidrax said:

That would take entirely too long!

Here are some 1x1 plates. Three systems, three logos... and two prototypes :)

Spidrax

Haha cool :)

Speedman29

I thought it easiest to add a couple of sections to my collection of every coloured crab. I now have a full set of lobster and hermit crabs too!

Recent BL orders have seen the odd scorpion added to them, and yesterday I bit the bullet for the tan coloured version thats only in one set, so hopefully thats another collection ready to build a stand for

Shib

@Speedman29

if you’re after all the LEGO crabs (*childish giggle*) don’t forget Sebastian!

The_Rancor

And the crab guardian from Atlantis

Bobflip

And Mrs Krabappel

eMJeeNL

Saw some trans-C3POs for sale on FB; bidding to start @€100 per colour. Anyone?

Paperballpark

You can get them from MinifigureDreams for about $55 each...

CCC

Are these out of hours overtime bonus moulds?

Paperballpark

Yep.

CCC

They need to start marbling them.