Shopping at LEGO or Amazon?
Please use our links: LEGO.comAmazon
As an Amazon Associate we earn from qualifying purchases.

(Not quite) Bendybadger's Bonusball Draw - #30320 Gallimimus Trap & #5004077 Target Cube 2015*

goshe7goshe7 Columbus, Ohio, USAMember Posts: 516
Stepping in to give the very generous BendyBadger a break.  Same rules as usual, just post a reply to enter.

Prizes are the #30320 Gallimimus Trap and the minifigs (and stands) from the 2015 Target Cube #5004077.  Since the cube box was damaged when shipping to me, I don't plan on wasting postage to send that.

Question that I hope hasn't been asked before: What LEGO part do you wish they would make?  Mine is #2877 (Brick with Grille) in Earth Blue.  That has to be one of my favorite LEGO colors and I have a CSX train engine just waiting for that embellishment.



  • TheBigLegoskiTheBigLegoski Amsterdam, NederlandMember Posts: 1,435
    edited December 2015
    I would like lego to make some sort of plates with studs on both sides, so you can connect other plates back to back to that. This would e.g. make the main airfoil of my B-Wing #75050 look much better.
  • MattsWhatMattsWhat Studley, UKMember Posts: 1,643
    edited December 2015
    Oooh.. an awesome prize today, going to have everything crossed until tomorrow night now - good job stepping in @goshe7 !  (I do have to thank @ecmo47 for having me covered in the likely event of not winning though!)
    My part request would be 15209 in black.  I have been trying to MOC a balrog for ever, and these would make his back so much easier! This part for the uninitiated:
  • BumblepantsBumblepants DFW/BGMember Posts: 7,343
    I would like to see larger 45 angle slopes in Dark Brown. Enough to make roofing in that color easier.
  • COOLEGOCOOLEGO B'ham/SolihullMember Posts: 208

    Great job stepping in @goshe7 ...

    For me it would have to be 6181 in any other colour than blue.

  • MrJ_NYMrJ_NY A flick missle away from Brickagara FallsMember Posts: 592
    I wish they still made blue baseplates
  • Toc13Toc13 Member Posts: 1,128
    Some stained glass panels with pictures on them - similar to the ninjago dragon panels
  • magrimagri UKMember Posts: 157
    87995 Minifig Hair Bubble Style (Afro) in a fetching purple!
  • AleyditaAleydita BelgiumMember Posts: 948
    2x4 bricks in Trans Green and Yellowish Green would be great for me. Boring, I know, and they might actually exist but not that I've been able to find.
  • BastaBasta Australia Member Posts: 1,259
    They did make these but currently they don't so that should count. Sand green 1x2 brick with grove and the 2x2 dark blue plate. Thanks
  • pumbaughpumbaugh Member Posts: 23
    2412 in dark green
  • bendybadgerbendybadger ::1Member Posts: 1,141
    Thanks a lot for stepping in @goshe7 and and a truly awesome prize too. What a great community we have.

    Uninspired but, I would love lego to produce a Badger.  The closest I think we will ever get is the skunk we get with S15 minifigs but that is what would make my day.
  • mr.pigglesmr.piggles Snow FortMember Posts: 326
    I really just need white baseplates.

    To be totally self-centered, I wish for a variety of bricks in colors I like (like cool yellow), and more trans-glitter bricks because I have a nice collection going. Trans-clear with silver glitter tiles would be about right for icy spots, which would work perfect with the white baseplates.
  • RoskoboyRoskoboy Aberdeen, UKMember Posts: 128
    A grey goatee beard...for me!
  • PoMoPinkPoMoPink UKMember Posts: 275
    All of the pieces of the Grand Carousel ... in the same box again ;)
  • BoomDiggityBoomDiggity Member Posts: 107
    Molded reindeer...
  • theLEGOmantheLEGOman UKMember Posts: 1,525
    Not quite a single part but translucent minifigs.
  • ScarraScarra LondonMember Posts: 139
    A plate with studs on both sides.
  • Renegade007cjhRenegade007cjh Essex, UKMember Posts: 694
    edited December 2015
    The Dalek's head cap 6132557 in red, silver, black (and any other colours) so we can create an army of different types! Alternatively, create the detail as stickers that we can apply to standard ones!

  • leetshoeleetshoe USAMember Posts: 255
    l wish they would make everything printed instead of stickers...
  • CCCCCC UKMember Posts: 20,366
    I'd like a corner brick with an internal angle of 120 degrees.
  • ShibShib UKMember Posts: 5,476
    edited December 2015
    So many parts that it's hard to pick one...far more small parts in 1 or 2 by 3 would be useful for microscale stuff!
  • tecjamtecjam Germany / SwitzerlandMember Posts: 255
    Blue and white baseplates
  • paul_mertonpaul_merton UKMember Posts: 2,967
    I'd like to see improved caterpillar tracks that work properly with both toothed and untoothed wheels. Current track parts only work securely with toothed elements, allowing wheeled parts to only rest awkwardly on top of them unless they are offset.
  • Lego_StarLego_Star ... in a galaxy far, far away.Member Posts: 2,147
    Whilst I am dreaming....

    Roof Tile 1X2X3/74° Inv in New Dark Red would resolve LEGO wish #2

  • Wicksy80Wicksy80 Northern IrelandMember Posts: 596
    A train track end bumper. 
  • SlapNutsSlapNuts Triad NC, USAMember Posts: 40
    I second the printing vs stickers!
  • raygunnraygunn Member Posts: 95
    I wish that baseplates were more readily available in a variety of colours.
  • murroughmurrough Member Posts: 59
    I would also like to see White Large Baseplate
  • VorpalRyuVorpalRyu AustraliaMember Posts: 2,318
    4L Bar in the original Trans-Green, also wouldn't mind it in Trans-Fluorescent Blue, Trans-Black/Brown & Trans-Clear.

    I would also love to see TLG bring back copper, or create a new Pearl-Copper colour, need some Lightsaber hilts & a small list of other things in this colour.
  • iplanteiplante USMember Posts: 164
    I wish Lego would make all of the pieces I need to complete my childhood sets from the late 80s and early 90s so I don't have to get them on the bay or on bricklink:)
  • hoodaddyhoodaddy USMember Posts: 317
    I would agree with a few others on baseplates in a variety of colors and sizes
  • pookiepookie Member Posts: 158
    I wish Lego would continue making rised base plates
  • PoltergeistPoltergeist Member Posts: 6
    I wish they still made the molded baseplates.
  • hmnicollhmnicoll Member Posts: 65
    Pieces with studs on each side 
  • tcctcc Washington, DCMember Posts: 73
    Definitely more variety in baseplate colors.
  • xiahnaxiahna Member Posts: 156

    Hard one. I guess I'd really like Lego to make more printed parts. I'm really not a fan of stickers.

  • alldarkeralldarker NetherlandsMember Posts: 225
    Yup, for me it would be a return of molded baseplates.
  • RailsRails Brierley Hill, UKMember Posts: 153
    I would like them to make wider radius train track, more variety in train track pieces in general actually would be nice to see.
  • sukhsukh Member Posts: 142
    I'd like to see Lunar baseplates made again
  • SithLord196SithLord196 Member Posts: 1,161
    More colors for baseplates being readily available would be nice.
  • BrickDancerBrickDancer Dunes of TatooineMember Posts: 3,639
    1x1 plate in Light Flesh color
  • TkattTkatt MNMember Posts: 472
    Sand red masonry bricks. Curved tiles and plates that match the macaroni bricks. Road Baseplates designed for the modular buildings- with wider streets and just one or two rows of studs on each side.
  • cheshirecatcheshirecat Member Posts: 5,332
    edited December 2015
    1x1 plate with slide on two (next to each other) sides. So like this, but for use on corners

  • khmellymelkhmellymel United KingdomMember Posts: 1,306
    edited December 2015
    Another vote for printed pieces... I don't mind stickers actually, but printed pieces are just so much nicer.

    Oh and I'd like some more pieces in azure.

    [EDIT] I just read @Tkatt's answer for masonary bricks in sand red... yes please!  Or dark red, that works too.  :D
  • LegopantsLegopants GermanyMember Posts: 2,093
    Lots more heads with stubble.
  • CupIsHalfEmptyCupIsHalfEmpty CanadaMember Posts: 547
    a 180 degree SNOT plate. Another clone brand has these and I've been been tempted to use them :O 
  • andheandhe UKMember Posts: 3,744
    Lego sheep.
  • LostInTranslationLostInTranslation UKMember Posts: 5,594
    Masonry bricks in dark orange. And a wood patterned brick in reddish brown. And white baseplates.
  • SirBenSirBen In the Hall of the Mountain KingMember Posts: 589
    'Glass' to fit 

    LEGO Window 1 x 2 x 2.667 with Rounded Top (30044)

  • cmrt1014cmrt1014 Member Posts: 396
    More parts in the sand colors, especially, sand blue!
Sign In or Register to comment.

Shopping at or Amazon?

Please use our links: Amazon

Recent discussions Categories Privacy Policy

Howdy, Stranger!

It looks like you're new here. Sign in or register to get started. is a participant in the Amazon Services LLC Associates Program, the, Inc. Associates Program and the Amazon EU Associates Programme, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.

As an Amazon Associate we earn from qualifying purchases.